Stock Code: FGSD-1022P
| Hardware Specifications | |
|---|---|
| 10/100Mbps Copper Ports | 8 × 10/100Base-TX RJ-45 auto-MDI/MDI-X ports |
| 1000Mbps Copper Ports | 2 × 10/100/1000Base-T RJ-45 auto-MDI/MDI-X ports |
| SFP / mini-GBIC Slots | 2 × 1000Base-SX/LX/BX, shared with Port-9 ~ Port-10 |
| Switch Architecture | Store-and-Forward |
| Switch Fabric | 5.6 Gbps / non-blocking |
| Switch Throughput | 4.16 Mpps @64 Bytes |
| Address Table | 8K entries |
| Shared Data Buffer | 2 Mbits |
| Maximum Frame Size | 9K Bytes |
| Flow Control | Back pressure for Half-Duplex IEEE 802.3x Pause Frame for Full-Duplex |
| LED Indicators | Power (Green) Link / Activity (Green) PoE In-Use (Orange) 1000 LNK / ACT (Green) 10/100 LNK / ACT (Orange) |
| Dimensions (W × D × H) | 330 × 155 × 43.5 mm |
| Weight | 1.63 kg |
| Reset Button | < 1-5 seconds: System reboot > 10 seconds: Factory default |
| Power Input | 100 ~ 240V AC, 50/60Hz |
| Power Consumption | 200 watts / 58.6 BTU |
| Power over Ethernet | |
| PoE Standard | IEEE 802.3af Power over Ethernet / PSE |
| PoE Power Supply Type | End-span |
| PoE Power Output | Per port 48V DC, 350mA. Max. 15.4 watts |
| Power Pin Assignment | 1/2(+), 3/6(-) |
| PoE Power Budget | 180 watts* |
| Max. number of Class 2 PD | 8 |
| Max. number of Class 3 PD | 8 |
| Layer 2 Functions | |
| Management Interface | Console, Telnet, Web Browser, SSL, SNMPv1, v2c, v3 |
| Port Configuration | Port disable / enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow Control disable / enable |
| Port Status | Display each port's speed duplex mode, link status and flow control status Auto-negotiation status, trunk status |
| Port Mirroring | TX / RX / Both 1 to 1 monitor |
| Bandwidth Control | Ingress / Egress Rate Control Allows to configure per 128Kbps |
| VLAN | IEEE 802.1Q Tag-based VLAN, up to 255 VLAN groups out of 4041 VLAN IDs Port-based VLAN Q-in-Q tunneling GVRP for VLAN Management, up to 128 dynamic VLAN entries Private VLAN Edge (PVE / Protected Port) with two isolated port groups |
| Link Aggregation | Static Port Trunk IEEE 802.3ad LACP (Link Aggregation Control Protocol) Supports 13 groups of 8-port trunk |
| QoS | 4 priority queues Traffic classification based on: - Port priority - 802.1p priority - DSCP / TOS field in IP Packet |
| IGMP Snooping | IGMP (v1/v2) Snooping, up to 256 multicast groups |
| Access Control List | IP-based Layer 3 / Layer 4 ACL Up to 220 ACL rule entries |
| SNMP MIBs | RFC-1213 MIB-II RFC-2863 Interface MIB RFC-2665 EtherLike MIB RFC-1493 Bridge MIB RFC-2819 RMON MIB (Group 1, 2, 3, 9) RFC-2737 Entity MIB POWER-ETHERNET-MIB |
| Standards Conformance | |
| Regulation Compliance | FCC Part 15 Class A, CE |
| Safety | UL, cUL |
| Standards Compliance | IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3ab 1000Base-T IEEE 802.3z 1000Base-SX/LX IEEE 802.3x Flow Control and Back Pressure IEEE 802.3ad Port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN Tagging IEEE 802.1x Port Based Network Access Control IEEE 802.3af Power over Ethernet RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP version 1 RFC 2236 IGMP version 2 |
| Environment | |
| Operating | Temperature: 0 ~ 50 degrees C Relative Humidity: 20% ~ 95% |
| Storage | Temperature: -10 ~ 70 degrees C Relative Humidity: 20% ~ 95% (non-condensing) |
