Isolates the through line from the panel body
An isolated bulkhead adapter with a BNC female interface at both ends. The bodies are isolated from the housing, so the signal line crosses to the far side without touching the panel metal. The threaded body seats in the panel hole with a nut.
75 Ωimpedance
DC – 3 GHzfrequency range
Female – FemaleBNC interface
ø13.0 mmpanel hole diameter
32.5 mmoverall length
Key features
Isolatedbody
Electrical separation from the panel
The bodies are isolated from the housing, so the line makes no contact with the panel metal.
75Ω
Impedance matched to broadcast lines
Its characteristic impedance is 75 Ω and fits the layout of broadcast and HD video lines.
3GHz
Wide operating band
The frequency range extends from DC to 3 GHz and carries serial digital video signals.
10in-lbs
Body that resists tightening torque
The bodies withstand at least 10 in-lbs of torque without rotating inside the housing.
1/2-28UNEF
Threaded panel mounting
The 1/2-28UNEF-2A threaded body seats on the panel with a 2.8 mm thick hex nut.
Everyday use on the panelIndependent of the metal panelThe connector body makes no electrical bond with the panel; the line keeps its own path.
One hole to mountOnce the panel hole is prepared, the nut and lock washer hold the connector in place.
Documented parts listThe assembly parts list shows the body, insulator, contact pin, lock washer and hex nut separately.
Usage areasBroadcast·High-bandwidth video equipment·D1/D2 serial digital·Graphics workstations·Telephone and workstations
It complies with RoHS under EU 2002/95/EC. The panel cut-out follows a ø13.0 mm diameter and a 12.1 mm flat.
