Runs the coaxial line straight through the panel
A panel-mount feed-through connector with a BNC female interface at both ends. It carries the line to the far side of rack, enclosure and cabinet panels without breaking it; the diecast zinc alloy housing carries a satin nickel finish.
75 Ωimpedance
DC – 3 GHzfrequency range
Female – FemaleBNC interface
Ø24.0 mmpanel cut-out diameter
Satin nickelshell finish
1000mating cycles
Key features
75Ω
Impedance matched to broadcast lines
It fits the 75 Ω layout used on radio, TV and HD video lines.
3GHz
Wide operating band
The frequency range extends from DC to 3 GHz and carries serial digital and HD video signals.
1000cycles
Long mating life
The mating cycle life is 1000, so it keeps serving on panels where connectors come and go often.
Ø24.0mm
Ready panel cut-out
The panel hole is Ø24.0 mm, with two Ø3.4 mm mounting holes on a 24.0 mm × 19.0 mm spacing.
1/2-28UNEF
Bushing clamped by a nut
A hex nut and lock washer fasten the 1/2-28UNEF-2A threaded bushing to the panel.
Everyday use on the panelService without cutting the cableUnplugging the front cable is enough; the line behind the panel stays in place.
Tidy rear of the panelThe line terminates at the panel, so cables do not wander inside the enclosure.
Mounting hardware in the boxThe nut and washer come with the product, so there are no extra parts to hunt for.
Usage areasBroadcast·High-bandwidth video equipment·D1/D2 serial digital·Graphics workstations·Telephone and workstations
It complies with RoHS under EU 2002/95/EC. The matt black finish option appears under code AC-BNC-JJ-75B.
