Name: Outdoor Wireless Access Point, IP67 rating, built-in directional smart antenna and lightning arrester, 3×3 MIMO
Brand: Ruijie Networks
SKU: RG-AP630(IDA)

A directional smart antenna focuses coverage on the intended direction.

A dual-band access point for outdoor wireless coverage. It transmits concurrently on 802.11n (2.4 GHz) and 802.11ac (5 GHz), and the built-in directional smart antenna steers its beam in real time. The IP67 enclosure keeps working through wind, rain and dust.

1.75 GbpsMaximum throughput per AP

10 dBiAntenna gain

IP67Protection Grade

27 dBmMaximum transmission power

25 WPower draw

256Clients per AP

Key features

1.75Gbps

Dual-band capacity

It reaches 450 Mbps on the 2.4 GHz band and 1.3 Gbps on the 5 GHz band.

10dBi

Directional antenna gain

It concentrates the beam on the target area and keeps the signal strong at distant points.

IP67rating

Outdoor enclosure

The waterproof, dustproof and moisture-proof housing also meets flame-retardant requirements.

3streams

Spatial streams

The 3×3 MIMO layout serves more clients at the same time.

256clients

Concurrent connections

A single unit absorbs dense access in crowded open areas.

27dBm

Transmission power

It steps down to 15 dBm in 1 dBm increments to match local regulations.

IN THE FIELD

Powering a camera over PoE OUTThe ETH2 port powers a surveillance device at the same site directly, with no separate electrical run.

Pole or wall mountingThe adjustable mounting kit changes the horizontal and vertical angle on site.

Operation in the coldThe built-in heater module engages at -15°C and keeps the unit running in freezing conditions.

Usage AreaLarge campuses·Wireless city deployments·Ports·Warehouses·Mines

Model: RG-AP630(IDA)
Basic Technical Specifications
Target Deployments	For large campus, wireless city, port, warehouse, mine
Radio	Concurrent dual-radio dual-band
Protocol	802.11a/b/g/n/ac
Operating bands	802.11b/g/n: 2.4GHz to 2.483GHz 802.11a/n/ac: 5.150GHz - 5.350GHz, 5.47GHz - 5.725GHz, 5.725GHz - 5.850GHz (varies by country)
Antenna	Built-in Directional Smart Antenna (external support / internal antenna replacement)
Antenna gain	10dBi
Maximum throughput	450Mbps@2.4GHz 1.3Gbps@5GHz 1.75 Gbps per AP
Spatial streams	3
Modulation	OFDM: BPSK@6/9Mbps QPSK@12/18Mbps 16-QAM@24Mbps 64-QAM@48/54Mbps DSSS: DBPSK@1Mbps DQPSK@2Mbps CCK@5.5/11Mbps MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM and 256QAM
Maximum transmission power	27dBm Note: Transmission power can be configured down to 15dBm in 1dBm steps. Actual transmission power depends on local laws and regulations.
IP rating	IP67
Receiver sensitivity	11b: -99dBm(1Mbps), -93dBm(5.5Mbps), -90dBm(11Mbps) 11a/g: -93dBm(6Mbps), -85dBm(24Mbps), -82dBm(36Mbps), -77dBm(54Mbps) 11n: -92dBm@MCS0, -73dBm@MCS7, -92dBm@MCS8, -73dBm@MCS15 11ac HT20: -90dBm (MCS0), -63dBm (MCS9) 11ac HT40: -85dBm (MCS0), -60dBm (MCS9) 11ac HT80: -82dBm (MCS0), -58dBm (MCS9)
Adjustable power	1dBm
Ports
Service Port	1 10/100/1000Mbps ETH1/PoE INPUT port (RJ45 connector), 1 10/100/1000Mbps ETH2/PoE OUTPUT port (RJ45 connector), 1 SFP port (combo with ETH1)
Management Port	1 console port (RJ45 or Bluetooth)
Power
Power Source	PoE+ (802.3at) Ruijie support 60W PoE adapter@PSE (PoE Output)
Power consumption	<25W
WLAN
Maximum Clients per AP	Up to 256
BSSID capacity	Up to 16 per radio Up to 32 per AP
SSID hiding	Supported
Configuration of authentication mode, encryption mechanism and VLAN attributes for each SSID	Supported
Remote Intelligent Perception Technology (RIPT)	Supported
X-speed	Supported
Smart load balancing based on number of users or traffic	Supported
STA control	SSID/radio based
Bandwidth control	STA/SSID/AP based speed control
Preference for 5GHz (band steering)	Supported
Wireless position tracking	Supported
Dynamic Frequency Selection (DFS)	Future version support
Security
PSK, web, and 802.1x authentication	Supported
Data encryption	WPA (TKIP), WPA2 (AES), WPA-PSK and WEP (64 or 128 bit)
QR code authentication	Supported
SMS authentication	Supported
PEAP authentication	Supported
Data frame filtering	Whitelist, static/dynamic blacklist
User isolation	Supported
Rogue AP detection and countermeasures	Supported
Dynamic ACL assignment	Supported
RADIUS	Supported
CPU Protection Policy (CPP)	Supported
Network Foundation Protection Policy (NFPP)	Supported
Wireless Intrusion Detection System (WIDS)	Supported
Wireless Intrusion Prevention System (WIPS)	Supported
Routing
IPv4 address	Static IP address or DHCP reservation
IPv6 CAPWAP tunnel	Supported
ICMPv6	Supported
IPv6 address	Manual or automatic configuration
ISATAP	Supported
Multicast	Multicast to unicast conversion
External Features
Lock	Supported
LED indicators	Power status and WDS signal strength
Related Standard
Wi-Fi alliance certification	Supported
Safety standards	GB4943, UL/CSA 60950-1, EN/IEC 60950-1, EN/IEC 60950-22
EMC standards	GB9254-2008, EN301 489, EN55022, FCC Part15
Health standards	FCC Bulletin OET65C, EN 50385, IC Safety Code 6
Radio standards	FCC Part15, EN300328, EN301893
Vibration standard	GB/T 2423
Technical Specifications
Dimensions (W x D x H) (mm)	276 × 246 × 90
Weight	<2.5kg
Operating Environment
Operating Temperature	-40°C up to 55°C (heater module will be active at -15°C)
Storage Temperature	-40°C up to 70°C
Operating Humidity	5% to 95% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)
Installation Mode	Wall/pole mounting installation
Management and Maintenance
Network management	SNMP v1/v2C/v3, Telnet, SSH, TFTP, FTP and web management
Visualized wireless heat map analysis	Supported (requires integration with SNC)
Real-time spectrum analysis	Supported (requires integration with SNC)
Fault detection and alarm	Supported
Cloud AC management	Supported
Statistics and records	Supported
FAT/FIT switching	AP operating in FIT mode can switch to FAT mode via RG-WS wireless AC. AP operating in FAT mode can switch to FIT mode via local console port or Telnet.

Model: RG-AP630(IDA)

Basic Technical Specifications

Target Deployments

For large campus, wireless city, port, warehouse, mine

Radio

Concurrent dual-radio dual-band

Protocol

802.11a/b/g/n/ac

Operating bands

802.11b/g/n: 2.4GHz to 2.483GHz
802.11a/n/ac: 5.150GHz - 5.350GHz, 5.47GHz - 5.725GHz, 5.725GHz - 5.850GHz
(varies by country)

Antenna

Built-in Directional Smart Antenna (external support / internal antenna replacement)

Antenna gain

10dBi

Maximum throughput

450Mbps@2.4GHz
1.3Gbps@5GHz
1.75 Gbps per AP

Spatial streams

Modulation

OFDM: BPSK@6/9Mbps
QPSK@12/18Mbps
16-QAM@24Mbps
64-QAM@48/54Mbps
DSSS: DBPSK@1Mbps
DQPSK@2Mbps
CCK@5.5/11Mbps
MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM and 256QAM

Maximum transmission power

27dBm
Note: Transmission power can be configured down to 15dBm in 1dBm steps. Actual transmission power depends on local laws and regulations.

IP rating

IP67

Receiver sensitivity

11b: -99dBm(1Mbps), -93dBm(5.5Mbps), -90dBm(11Mbps)
11a/g: -93dBm(6Mbps), -85dBm(24Mbps), -82dBm(36Mbps), -77dBm(54Mbps)
11n: -92dBm@MCS0, -73dBm@MCS7, -92dBm@MCS8, -73dBm@MCS15
11ac HT20: -90dBm (MCS0), -63dBm (MCS9)
11ac HT40: -85dBm (MCS0), -60dBm (MCS9)
11ac HT80: -82dBm (MCS0), -58dBm (MCS9)

Adjustable power

1dBm

Ports

Service Port

1 10/100/1000Mbps ETH1/PoE INPUT port (RJ45 connector),
1 10/100/1000Mbps ETH2/PoE OUTPUT port (RJ45 connector),
1 SFP port (combo with ETH1)

Management Port

1 console port (RJ45 or Bluetooth)

Power

Power Source

PoE+ (802.3at)
Ruijie support 60W PoE adapter@PSE (PoE Output)

Power consumption

<25W

WLAN

Maximum Clients per AP

Up to 256

BSSID capacity

Up to 16 per radio
Up to 32 per AP

SSID hiding

Supported

Configuration of authentication mode, encryption mechanism and VLAN attributes for each SSID

Supported

Remote Intelligent Perception Technology (RIPT)

Supported

X-speed

Supported

Smart load balancing based on number of users or traffic

Supported

STA control

SSID/radio based

Bandwidth control

STA/SSID/AP based speed control

Preference for 5GHz (band steering)

Supported

Wireless position tracking

Supported

Dynamic Frequency Selection (DFS)

Future version support

Security

PSK, web, and 802.1x authentication

Supported

Data encryption

WPA (TKIP), WPA2 (AES), WPA-PSK and WEP (64 or 128 bit)

QR code authentication

Supported

SMS authentication

Supported

PEAP authentication

Supported

Data frame filtering

Whitelist, static/dynamic blacklist

User isolation

Supported

Rogue AP detection and countermeasures

Supported

Dynamic ACL assignment

Supported

RADIUS

Supported

CPU Protection Policy (CPP)

Supported

Network Foundation Protection Policy (NFPP)

Supported

Wireless Intrusion Detection System (WIDS)

Supported

Wireless Intrusion Prevention System (WIPS)

Supported

Routing

IPv4 address

Static IP address or DHCP reservation

IPv6 CAPWAP tunnel

Supported

ICMPv6

Supported

IPv6 address

Manual or automatic configuration

ISATAP

Supported

Multicast

Multicast to unicast conversion

External Features

Lock

Supported

LED indicators

Power status and WDS signal strength

Related Standard

Wi-Fi alliance certification

Supported

Safety standards

GB4943, UL/CSA 60950-1, EN/IEC 60950-1, EN/IEC 60950-22

EMC standards

GB9254-2008, EN301 489, EN55022, FCC Part15

Health standards

FCC Bulletin OET65C, EN 50385, IC Safety Code 6

Radio standards

FCC Part15, EN300328, EN301893

Vibration standard

GB/T 2423

Technical Specifications

Dimensions (W x D x H) (mm)

276 × 246 × 90

Weight

<2.5kg

Operating Environment

Operating Temperature

-40°C up to 55°C (heater module will be active at -15°C)

Storage Temperature

-40°C up to 70°C

Operating Humidity

5% to 95% (non-condensing)

Storage Humidity

5% to 95% (non-condensing)

Installation Mode

Wall/pole mounting installation

Management and Maintenance

Network management

SNMP v1/v2C/v3, Telnet, SSH, TFTP, FTP and web management

Visualized wireless heat map analysis

Supported (requires integration with SNC)

Real-time spectrum analysis

Supported (requires integration with SNC)

Fault detection and alarm

Supported

Cloud AC management

Supported

Statistics and records

Supported

FAT/FIT switching

AP operating in FIT mode can switch to FAT mode via RG-WS wireless AC.
AP operating in FAT mode can switch to FIT mode via local console port or Telnet.

Outdoor Wireless Access Point, IP67 rating, built-in directional smart antenna and lightning arrester, 3×3 MIMO

Datasheet

RG-AP630(IDA)

Similar Products

IP55 802.11b/g/n 2.4GHz, 300Mbps Outdoor WLAN CPE, 2 x RP-SMA Connector

IP55 802.11ac, 5GHz 900Mbps Outdoor Wireless CPE

Outdoor 5G Wireless video transmission device (CPE)

Metrolinq™ Alignment Scope, 9x50 Magnification Accessory

Outdoor Wireless Access Point, IP67 rating, built-in directional smart antenna and lightning arrester, 3×3 MIMO

Datasheet

RG-AP630(IDA)

Similar Products

IP55 802.11b/g/n 2.4GHz, 300Mbps Outdoor WLAN CPE, 2 x RP-SMA Connector

IP55 802.11ac, 5GHz 900Mbps Outdoor Wireless CPE

Outdoor 5G Wireless video transmission device (CPE)

Metrolinq™ Alignment Scope, 9x50 Magnification Accessory