Ties eight PoE+ ports to the same ring through gigabit combo uplinks.

It carries 8 10/100Base-T(X) PoE+ ports and 2 Gigabit combo ports; the combo ports accept RJ45 copper or SFP fiber links. It powers edge devices over the data cable and works between -40 and 70 °C in an IP-30 aluminum housing.

810/100Base-T(X) PoE+ ports

2Gigabit combo ports (RJ45 / SFP)

240 WTotal PoE output power

30 WPoE power per port

7.2 GbpsSwitching Capacity

-40 to +70 °COperating Temperature

Key features

30W

IEEE 802.3at PoE+

Each copper port powers a camera or an access point.

10ms

Fast Ethernet ring recovery

Rebuilds the broken path on an O-Ring of 250 connections.

4.166Mpps

Throughput

Forwards 64-byte packets at wire speed.

MAC address table

Keeps the field devices in a single address table.

50~57VDC

Dual power input

The second source keeps the supply up when the first one drops.

1185g

Aluminum housing

The IP-30 body withstands harsh cabinet conditions.

IN DAILY USE

Central managementSupports web interface, Telnet, console CLI and the Open-Vision utility.

Optical monitoringThe DDM function shows module voltage, current and temperature status instantly.

SecuritySupports HTTPS and SSH protocols and runs TACACS+ and 802.1x user authentication.

Usage AreasFacility management·Power infrastructure·Telecommunications·Transportation systems

This model has no reverse polarity protection; observe the supply polarity during installation.

Physical Ports
Gigabit Combo ports with 10/100/1000Base-T(X) RJ45 and 100/1000Base-X SFP ports	2
10/100Base-T(X) ports with P.S.E. in RJ45	8
RS-232 Serial Console port	RS-232 in RJ45 connector with console cable. 9600bps, 8, N, 1
LED Indicators
Power Indicator (Power)	Green: Power LED x 3
Ring Master Indicator (R.M.)	Green: Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring)	Green: Indicates that the system is operating in O-Ring mode Green Blinking: Indicates that the Ring is broken.
Fault Indicator (Fault)	Amber: Indicates unexpected event occurred
10/100Base-T(X) M12 P.S.E. Port Indicator	Green for Link/Act indicator: Green for link-up, Off for link-down, Blinking for Act. Amber for Duplex/Collision indicator: on for full-duplex, off for half-duplex, blinking for half-duplex and collision occurred.
100/1000Base-X SFP Port With Combo Port Indicator	Green for Link/Act indicator: Green for link-up, Off for link-down, Blinking for Act.
PoE Indicator	Green: On for PoE enabled, Off for PoE disabled
Power
Power consumption (Typ.)	11 Watts (power consumption of P.S.E. is not included)
Redundant Input power	Dual DC inputs, 50~57VDC on 6-pin terminal block
Total PoE Output Power	240 Watts Max.
Overload current protection	Present
Reverse polarity protection	Not Presented
Certification
Safety	EN 60950-1, UL 60950-1, IEC 60950-1
Physical Characteristic
Enclosure	IP-30 Aluminum
Dimensions (mm)	74.3 (W) x 107.5 (D) x 153.6 (H) mm / 2.93 (W) x 4.23 (D) x 6.05 (H) inch
Weight (g)	1185 g
Technology
Ethernet Standards	IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3z for 1000Base-X IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol) IEEE 802.1D for STP (Spanning Tree Protocol) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table	8K
Packet Buffer Size	1Mb
Priority Queues	4
Processing	Store-and-Forward
Switch Properties	Switching latency: < 7 µs Switching bandwidth: 7.2Gbps Throughput (packet per second): 4.166Mpps@64Bytes packet Max. Number of Available VLANs: 4096 VLAN ID Range: VID 1 to 4095 IGMP multicast groups: 1024 Port rate limiting: User Define
Security Features	Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q) to segregate and secure network traffic Supports Q-in-Q VLAN for performance & security to expand the VLAN space Radius centralized password management SNMP V1/V2c/V3 encrypted authentication and access security
Software Features	STP/RSTP/MSTP (IEEE 802.1D/w/s) Redundant Ring (O-Ring) with recovery time less than 10/30ms over 250 units NOTE 1. Fast Ethernet ports supports less 10 milliseconds recovery time. NOTE 2. Gigabit Ethernet ports supports less 30 milliseconds recovery time. TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging and GVRP supported IGMP Snooping for multicast filtering Port configuration, status, statistics, monitoring, security SNTP for synchronizing of clocks over network Support PTP Client (Precision Time Protocol) clock synchronization DHCP Server / Client support Port Trunk support MVR (Multicast VLAN Registration) support Modbus TCP
Network Redundancy	O-Ring O-Chain MRP MSTP/RSTP/STP
Warning / Monitoring System	Relay output for fault event alarming Syslog server / client to record and view events Include SMTP for event warning notification via email Event selection support
Fault Contact
Relay	Relay output to carry capacity of 1A at 24VDC
Reset Function
Reset Button	< 5 sec: System reboot, > 5 sec: Factory default
Environmental
Storage Temperature	-40 to 85°C (-40 to 185°F)
Operating Temperature	-40 to 70°C (-40 to 158°F)
Operating Humidity	5% to 95% Non-condensing
Warranty
Warranty	5 years

Physical Ports

Gigabit Combo ports with 10/100/1000Base-T(X) RJ45 and 100/1000Base-X SFP ports

10/100Base-T(X) ports with P.S.E. in RJ45

RS-232 Serial Console port

RS-232 in RJ45 connector with console cable. 9600bps, 8, N, 1

LED Indicators

Power Indicator (Power)

Green: Power LED x 3

Ring Master Indicator (R.M.)

Green: Indicates that the system is operating in O-Ring Master mode

O-Ring Indicator (Ring)

Green: Indicates that the system is operating in O-Ring mode
Green Blinking: Indicates that the Ring is broken.

Fault Indicator (Fault)

Amber: Indicates unexpected event occurred

10/100Base-T(X) M12 P.S.E. Port Indicator

Green for Link/Act indicator: Green for link-up, Off for link-down, Blinking for Act.
Amber for Duplex/Collision indicator: on for full-duplex, off for half-duplex, blinking for half-duplex and collision occurred.

100/1000Base-X SFP Port With Combo Port Indicator

Green for Link/Act indicator: Green for link-up, Off for link-down, Blinking for Act.

PoE Indicator

Green: On for PoE enabled, Off for PoE disabled

Power

Power consumption (Typ.)

11 Watts (power consumption of P.S.E. is not included)

Redundant Input power

Dual DC inputs, 50~57VDC on 6-pin terminal block

Total PoE Output Power

240 Watts Max.

Overload current protection

Present

Reverse polarity protection

Not Presented

Certification

Safety

EN 60950-1, UL 60950-1, IEC 60950-1

Physical Characteristic

Enclosure

IP-30 Aluminum

Dimensions (mm)

74.3 (W) x 107.5 (D) x 153.6 (H) mm / 2.93 (W) x 4.23 (D) x 6.05 (H) inch

Weight (g)

1185 g

Technology

Ethernet Standards

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)

MAC Table

Packet Buffer Size

1Mb

Priority Queues

Processing

Store-and-Forward

Switch Properties

Switching latency: < 7 µs
Switching bandwidth: 7.2Gbps
Throughput (packet per second): 4.166Mpps@64Bytes packet
Max. Number of Available VLANs: 4096
VLAN ID Range: VID 1 to 4095
IGMP multicast groups: 1024
Port rate limiting: User Define

Security Features

Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q) to segregate and secure network traffic
Supports Q-in-Q VLAN for performance & security to expand the VLAN space
Radius centralized password management
SNMP V1/V2c/V3 encrypted authentication and access security

Software Features

STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 10/30ms over 250 units
NOTE 1. Fast Ethernet ports supports less 10 milliseconds recovery time.
NOTE 2. Gigabit Ethernet ports supports less 30 milliseconds recovery time.
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping for multicast filtering
Port configuration, status, statistics, monitoring, security
SNTP for synchronizing of clocks over network
Support PTP Client (Precision Time Protocol) clock synchronization
DHCP Server / Client support
Port Trunk support
MVR (Multicast VLAN Registration) support
Modbus TCP

Network Redundancy

O-Ring
O-Chain
MRP
MSTP/RSTP/STP

Warning / Monitoring System

Relay output for fault event alarming
Syslog server / client to record and view events
Include SMTP for event warning notification via email
Event selection support

Fault Contact

Relay

Relay output to carry capacity of 1A at 24VDC

Reset Function

Reset Button

< 5 sec: System reboot, > 5 sec: Factory default

Environmental

Storage Temperature

-40 to 85°C (-40 to 185°F)

Operating Temperature

-40 to 70°C (-40 to 158°F)

Operating Humidity

5% to 95% Non-condensing

Warranty

5 years

Rugged 8x 10/100TX (RJ-45) PoE+@30Watts + 2x Gigabit Combo (SFP/RJ-45)

Datasheet

IPS-3082GC-AT

Similar Products

L2 Managed 4 Port Gigabit PoE + 2 Port Gigabit SFP Managed IEEE802.3af/at Industrial PoE Switch

L2 Managed 8 Port Gigabit PoE + 4 Port Gigabit SFP Managed IEEE802.3af/at Industrial PoE Switch

L2 Managed 8 Port Gigabit PoE + 2 Port Gigabit SFP Managed IEEE802.3af/at Industrial PoE Switch

Industrial L2+ 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Wall-mount Managed Switch