| Hardware Specifications |
|---|
| Copper Ports | 8 10/100/1000BASE-T RJ-45 auto-MDI/MDI-X ports |
| PoE Inject Port | 4-Port with 802.3af/802.3at PoE injector function (Ports 1 to 4) |
| Connector | Removable 3-pin terminal block for power input
Pin 1/2 for Power (Pin 1: V+ / Pin 2: V-)
Pin 3 for earth ground
DC power jack with 2.0mm central pole |
| Power Requirements | 48V~54V DC, 3A (max.) |
| Power Consumption / Dissipation | Max. 130 watts / 443 BTU |
| Dimensions (W x D x H) | 148 x 24.2 x 134 mm |
| Weight | 561 g |
| ESD Protection | Contact Discharge 6KV DC
Air Discharge 6KV DC |
| Enclosure | IP30 metal |
| Installation | Wall mount, magnetic wall mount and DIN-rail kit |
| LED | Power LED:
Power (Green)
PoE Power Usage LED:
30W, 60W, 90W, 120W (Amber)
PoE Ports (Ports 1 to 4):
PoE-in-Use (Amber)
LNK/ACT (Green)
10/100/1000BASE-TX Ports (Ports 5 to 8):
1000 (Green)
LNK/ACT (Green) |
| Switching |
|---|
| Switch Architecture | Store-and-Forward |
| Switch Fabric | 16Gbps/non-blocking |
| Switch Throughput@64 bytes | 11.9Mpps @64 bytes |
| MAC Address Table | 8K entries |
| Shared Data Buffer | 1Mbit |
| Flow Control | IEEE 802.3x pause frame for full duplex
Back pressure for half duplex |
| Jumbo Frame | 9KB |
| Power over Ethernet |
|---|
| PoE Standard | IEEE 802.3af/802.3at Power over Ethernet PSE |
| PoE Power Supply Type | End-span |
| PoE Power Output | IEEE 802.3af Standard
Per port 48V~54V DC (depending on the power supply), max. 15.4 watts
IEEE 802.3at Standard
Per port 50V~54V DC (depending on the power supply), max. 36 watts |
| Power Pin Assignment | 1/2(+), 3/6(-) |
| PoE Power Budget | 120 watts (depending on power input) |
| Max. Number of Class 2 PDs | 4 |
| Max. Number of Class 3 PDs | 4 |
| Max. Number of Class 4 PDs | 4 |
| Standards Conformance |
|---|
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Stability Testing | IEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration) |
| Standards Compliance | IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3x Flow Control and Back Pressure |
| Environment |
|---|
| Operating | Temperature: -40 ~ 75 degrees C
Relative Humidity: 5 ~ 95% (non-condensing) |
| Storage | Temperature: -40 ~ 85 degrees C
Relative Humidity: 5 ~ 95% (non-condensing) |
| Accessories |
|---|
| Standard Accessories | QR Code Sheet x 1
3-pin Terminal Block Connector x 1
Wall-mounted Kit x 1
DIN-rail Kit x 1
Magnet Kit x 1
RJ45 Dust Cap x 8 |
