Name: IP30 Industrial 10/100/1000Base-T to Gigabit SFP Converter with 802.3at POE+ (-40 to 75C)
Brand: Planet
SKU: IGTP-805AT

Turns a Gigabit fiber link into a PoE-powered copper port.

An industrial media converter that joins a 10/100/1000Base-T copper port with a Gigabit SFP slot. The 802.3at PoE+ port on the copper side powers the attached device without a separate adapter.

10/100/1000Base-TCopper port

SFP (LC)Fiber interface

30 WPoE power budget

24 / 48 V DCRedundant power

-40 ~ 75 °COperating Temperature

Key features

PoE+ injectorDelivers up to 30 watts at 52 V DC to 802.3at and 802.3af devices.

Fiber uplinkThe SFP slot takes 1000Base-X and 100Base-FX modules; distance follows the module in use.

Redundant power and alarmTwo DC inputs back each other up; a 1 A @ DC 24 V relay output triggers an alarm on failure.

Jumbo framesForwards frames of 9216 bytes in one piece.

Industrial enclosureThe IP30 aluminum body mounts on DIN rail and wall, with 6 KV DC ESD and EFT protection.

Link fault pass-throughLFP enabled from the DIP switch mirrors a broken link to the far end and works with FEF against data loss.

Hardware Specifications
10/100/1000Base-T Port	1 x 10/100/1000Base-T RJ-45 interface, maximum 100 m distance Auto-negotiation, auto MDI / MDI-X and PoE injector function
1000Base-X Fiber Interface	IGTP-802T: SC IGTP-802TS: SC IGTP-805AT: SFP (LC), supporting 1000Base-X and 100Base-FX dual mode
Fiber Cable	IGTP-802T Multi-mode: 50/125 µm or 62.5/125 µm optic fiber IGTP-802TS Single-mode: 9/125 µm optic fiber IGTP-805AT Varies with SFP module
Cable Distance	IGTP-802T: 220 m / 550 m IGTP-802TS: 10 km IGTP-805AT: Varies with SFP module
Optical Wavelength	IGTP-802T: 850 nm IGTP-802TS: 1310 nm IGTP-805AT: Varies with SFP module
Launch Power	IGTP-802T Max. -4 dBm Min. -9.5 dBm IGTP-802TS Max. -3 dBm Min. -9.5 dBm IGTP-805AT Varies with SFP module
Receive Sensitivity	IGTP-802T: -13.5 dBm IGTP-802TS: -14.4 dBm IGTP-805AT: Varies with SFP module
Maximum Input Power	IGTP-802T: -18 dBm IGTP-802TS: -20 dBm IGTP-805AT: Varies with SFP module
IEEE 802.3at / 802.3af PoE Port	1, End-Span, 1/2(+), 3/6(-)
LED Indication	System: Power 1, Power 2 and Fault LED (green) Fiber port: LNK / ACT (green) 10/100/1000Base-T port: LNK / ACT, PoE in-use (green / orange)
Link Fault Pass-through DIP Switch	OFF: LFP (Link Fault Pass-through) disabled ON: LFP (Link Fault Pass-through) enabled FEF (Far End Fault) works with LFP to prevent data loss LFP is turned off by default on the DIP switch
Flow Control	Back pressure for half duplex, IEEE 802.3x pause frame for full duplex
Maximum Frame Size	9K (9216 bytes)
Power Requirements	24 V DC or 48 V DC, redundant power with polarity reverse protection
Enclosure	IP30 aluminium metal case
Dimensions (W × D × H)	135 × 87 × 32 mm
Weight	IGTP-802T / IGTP-802TS: 510 g IGTP-805AT: 500 g
Installation	DIN rail kit and wall mount ear
ESD Protection	6 KV DC
EFT Protection	6 KV DC
Alarm	Provides one relay output for power failure Alarm relay current carrying ability: 1 A @ DC 24 V
Speed	Twisted-pair: 10/20 Mbps half / full duplex, 100/200 Mbps half / full duplex, 1000/2000 Mbps full duplex Fiber optic: 200 Mbps / 2000 Mbps full duplex
Network Cables	10/100/1000Base-T: 2-pair UTP Cat. 3, 4, 5, 5e, 6 (maximum 100 meters) EIA / TIA-568 100-ohm STP (maximum 100 meters) 100Base-FX / 1000Base-SX / LX: Multi-mode: 50/125 µm or 62.5/125 µm optic fiber Single-mode: 9/125 µm optic fiber
Power Consumption	24 V: 33 watts / 112 BTU 48 V: 31 watts / 105 BTU (with PoE)
Power over Ethernet
PoE Standard	IEEE 802.3af / 802.3at High Power over Ethernet / PSE
PoE Power Supply Type	End-Span
PoE Power Output	52 V DC: 15.4 watts 52 V DC: 30 watts
Power Pin Assignment	1/2(+), 3/6(-)
PoE Power Budget	30 watts
Standards Conformance
Protocols and Standards Compliance	IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX / FX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3z 1000Base-SX / LX Gigabit Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3az Energy Efficient Ethernet (EEE)
Regulation Compliance	FCC Part 15 Class A, CE
Stability Testing	IEC60068-2-32 (free fall) IEC60068-2-27 (shock) IEC60068-2-6 (vibration)
Environmental Specifications
Temperature	Operating: -40 °C ~ 75 °C Storage: -40 °C ~ 75 °C
Humidity	Operating: 5% ~ 90% (non-condensing) Storage: 5% ~ 90% (non-condensing)

Hardware Specifications

10/100/1000Base-T Port

1 x 10/100/1000Base-T RJ-45 interface, maximum 100 m distance
Auto-negotiation, auto MDI / MDI-X and PoE injector function

1000Base-X Fiber Interface

IGTP-802T: SC
IGTP-802TS: SC
IGTP-805AT: SFP (LC), supporting 1000Base-X and 100Base-FX dual mode

Fiber Cable

IGTP-802T
Multi-mode: 50/125 µm or 62.5/125 µm optic fiber
IGTP-802TS
Single-mode: 9/125 µm optic fiber
IGTP-805AT
Varies with SFP module

Cable Distance

IGTP-802T: 220 m / 550 m
IGTP-802TS: 10 km
IGTP-805AT: Varies with SFP module

Optical Wavelength

IGTP-802T: 850 nm
IGTP-802TS: 1310 nm
IGTP-805AT: Varies with SFP module

Launch Power

IGTP-802T
Max. -4 dBm
Min. -9.5 dBm
IGTP-802TS
Max. -3 dBm
Min. -9.5 dBm
IGTP-805AT
Varies with SFP module

Receive Sensitivity

IGTP-802T: -13.5 dBm
IGTP-802TS: -14.4 dBm
IGTP-805AT: Varies with SFP module

Maximum Input Power

IGTP-802T: -18 dBm
IGTP-802TS: -20 dBm
IGTP-805AT: Varies with SFP module

IEEE 802.3at / 802.3af PoE Port

1, End-Span, 1/2(+), 3/6(-)

LED Indication

System:
Power 1, Power 2 and Fault LED (green)
Fiber port:
LNK / ACT (green)
10/100/1000Base-T port:
LNK / ACT, PoE in-use (green / orange)

Link Fault Pass-through DIP Switch

OFF: LFP (Link Fault Pass-through) disabled
ON: LFP (Link Fault Pass-through) enabled
FEF (Far End Fault) works with LFP to prevent data loss
LFP is turned off by default on the DIP switch

Flow Control

Back pressure for half duplex, IEEE 802.3x pause frame for full duplex

Maximum Frame Size

9K (9216 bytes)

Power Requirements

24 V DC or 48 V DC, redundant power with polarity reverse protection

Enclosure

IP30 aluminium metal case

Dimensions (W × D × H)

135 × 87 × 32 mm

Weight

IGTP-802T / IGTP-802TS: 510 g
IGTP-805AT: 500 g

Installation

DIN rail kit and wall mount ear

ESD Protection

6 KV DC

EFT Protection

6 KV DC

Alarm

Provides one relay output for power failure
Alarm relay current carrying ability: 1 A @ DC 24 V

Speed

Twisted-pair:
10/20 Mbps half / full duplex, 100/200 Mbps half / full duplex, 1000/2000 Mbps full duplex
Fiber optic:
200 Mbps / 2000 Mbps full duplex

Network Cables

10/100/1000Base-T:
2-pair UTP Cat. 3, 4, 5, 5e, 6 (maximum 100 meters)
EIA / TIA-568 100-ohm STP (maximum 100 meters)
100Base-FX / 1000Base-SX / LX:
Multi-mode: 50/125 µm or 62.5/125 µm optic fiber
Single-mode: 9/125 µm optic fiber

Power Consumption

24 V: 33 watts / 112 BTU
48 V: 31 watts / 105 BTU (with PoE)

Power over Ethernet

PoE Standard

IEEE 802.3af / 802.3at High Power over Ethernet / PSE

PoE Power Supply Type

End-Span

PoE Power Output

52 V DC: 15.4 watts
52 V DC: 30 watts

Power Pin Assignment

1/2(+), 3/6(-)

PoE Power Budget

30 watts

Standards Conformance

Protocols and Standards Compliance

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX / FX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3z 1000Base-SX / LX Gigabit Ethernet
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3az Energy Efficient Ethernet (EEE)

Regulation Compliance

FCC Part 15 Class A, CE

Stability Testing

IEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)

Environmental Specifications

Temperature

Operating: -40 °C ~ 75 °C
Storage: -40 °C ~ 75 °C

Humidity

Operating: 5% ~ 90% (non-condensing)
Storage: 5% ~ 90% (non-condensing)

IP30 Industrial 10/100/1000Base-T to Gigabit SFP Converter with 802.3at POE+ (-40 to 75C)

Datasheet

IGTP-805AT

Similar Products

IP30 Compact size Industrial 100/1000BASE-X SFP to 10/100/1000BASE-T 802.3at PoE+ Media Converter

Industrial 10/100/1000BASE-T to 100/1000BASE-X SFP Media Converter (-40~75 degrees C)