
Stock Code: BSP-300






| Hardware Features | |
|---|---|
| Network Connector | 3-Port RJ-45 for 10/100/1000Base-T (2-Port with 802.3at / 802.3af PoE injector function) |
| Console Port | 1 x RS-232 RJ-45 serial port |
| Power Output | 1 x DC output 24@ 2A maximum (two-pin terminal block) 2 x PoE output 52VDC; max. 30 Watt per PoE port |
| LED | System System (Green) Fault (Green) Per PoE Port (Port 1 / Port 2) Link / Active (Green) PoE In-Use (Orange) LAN Port (Port 3) 1000 Link / Active (Green) 10/100 Link / Active (Green) Per Port Interface Power LNK/ACT (Green) PoE In-Use (Orange) |
| Power over Ethernet | |
| Standard | IEEE 802.3at / IEEE 802.3af |
| Port | Port 1, Port 2 |
| Power Pin | RJ-45 Pin# 1/2 (+); Pin# 3/6 (-); PSE End-span |
| Power Voltage Injection | DC 52V |
| Consumption | 30 Watt max.; PoE Class 4 |
| Power Features | |
| System Voltage Values | DC 24V |
| Maximum Charging Current | 15A |
| Max. Solar Array Voc | DC 60V |
| Max. Operating Voltage | DC 45V |
| Total Current Consumption | While operating -32mA At idle -11mA |
| High Temperature Shutdown | 100°C disconnects solar and load 80°C reconnects solar energy and load |
| Overload Capacity | Will cut off load above 15 Amp |
| Battery Charging Features | |
| Charging Algorithm | Bulk charge (constant current), Absorption charge (constant voltage) and Floating charge. Absorption and Floating charge with PWM protection. |
| Maximum Output Current | 15A |
| Nickel-cadmium Battery | For NiCad type batteries ± 40 mV/°C, charge cut-off at 55°C (Temperature Compensation Baseline @ 25°C) |
| Lead-acid Batteries (Default Setting) | For lead-acid type batteries ± 60 mV/°C, charge cut-off at 55°C (Temperature Compensation Baseline @ 25°C) |
| Float Charge Voltage | DC 27.2V (26.0~30.0V) |
| Absorption Charge Voltage | DC 29.2V (28.0~32.0V) |
| LVD (Low Voltage Disconnect) | DC 22.2V (21.0~25.0V) |
| LVR (Low Voltage Reconnect) | DC 24.8V (23.0~27.0V) |
| Standards Conformance | |
| Computer Interface | IEEE 802.3 10Base-T IEEE 802.3u 10/100Base-TX IEEE 802.3ab 10/100/1000Base-T IEEE 802.3at / 802.3af for PoE (Power over Ethernet) devices |
| Regulatory Compliance | CE, FCC |
| System Unit | |
| Operating Temperature | -20 ~ 60°C |
| Storage Temperature | -40 ~ 90°C |
| Operating Humidity | 20% ~ 80% |
| Dimensions (W x D x H) | 107.2 x 152 x 65.7 mm |
| Weight | 0.79 kg |
| Installation | DIN Rail Kit and Wall Mount Kit |
| Software Utility | Device Detection / Diagnostic, Windows XP / Win 7 |




