Stock Code: WNAP-7335
| Hardware Specifications | |
|---|---|
| Standard Support | IEEE 802.11a/n IEEE 802.3 IEEE 802.3u IEEE 802.3x |
| Memory | 64 Mbytes DDR SDRAM 16 Mbytes Flash |
| PoE | Passive PoE |
| Interface | Wireless IEEE802.11a/n, 2T2R PoE LAN (LAN 1): 1 x 10/100BASE-TX, Auto-MDI/MDIX, passive PoE LAN 2: 1 x 10/100BASE-TX, Auto-MDI/MDIX, passive PoE pass-through |
| Antenna | Internal RP-SMA antenna connectors |
| Wireless RF Features | |
| Wireless Technology | IEEE 802.11a IEEE 802.11n |
| Data Rate | IEEE 802.11a: 6, 9, 12, 18, 24, 36, 48, 54Mbps IEEE 802.11n (20MHz): up to 150Mbps IEEE 802.11n (40MHz): up to 300Mbps |
| Media Access Control | CSMA/CA |
| Modulation | Transmission/Emission type: OFDM Data modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM |
| Frequency Band | 5.180GHz ~ 5.825GHz |
| Operating Channel | 5.180GHz CH36 5.580GHz CH116 5.200GHz CH40 5.600GHz CH120 5.220GHz CH44 5.620GHz CH124 5.240GHz CH48 5.640GHz CH128 5.260GHz CH52 5.660GHz CH132 5.280GHz CH56 5.680GHz CH136 5.300GHz CH60 5.700GHz CH140 5.320GHz CH64 5.745GHz CH149 5.500GHz CH100 5.765GHz CH153 5.520GHz CH104 5.785GHz CH157 5.540GHz CH108 5.805GHz CH161 5.560GHz CH112 5.825GHz CH165 *The 24 channels are defined by the theory. The actual application will vary based on the regulation in different regions and countries. |
| RF Output Power (Max.) | 802.11a 25 ±1dBm 802.11n 24 ±1dBm |
| Receiver Sensitivity (dBm) | 802.11a -94dBm 802.11n -93dBm |
| Output Power Control | 12~27dBm |
| Software Features | |
| LAN | Built-in DHCP server supporting static IP address distribution Supports 802.1d STP (Spanning Tree) |
| WAN | • Static IP • Dynamic IP • PPPoE |
| Operation Mode | • Bridge • WISP |
| Firewall | NAT firewall with SPI (Stateful Packet Inspection) Built-in NAT server supporting virtual server and DMZ Built-in firewall with Port/IP address/MAC/URL filtering features |
| Wireless Mode | • AP / Router • Client • WDS PTP • WDS PTMP • WISP |
| Channel Width | 20MHz / 40MHz |
| Wireless Isolation | Enable to isolate each connected wireless client so they cannot access each other |
| Encryption Type | 64/128-bits WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1x |
| Wireless Security | Wireless LAN ACL (Access Control List) filtering Wireless MAC address filtering Enable/Disable SSID Broadcast |
| Max. Wireless Clients | 25 |
| Max. WDS APs | 8 |
| Max. Wired Clients | 60 |
| WMM | Supports Wi-Fi multimedia |
| QoS | Supports Quality of Service for bandwidth control |
| NTP | Network Time Management |
| Self-Healing | Supports Schedule Reboot |
| Management | Web UI, DHCP Client, Configuration Backup and Restore, Dynamic DNS and SNMP |
| Diagnostic Tool | System Log, Ping Watchdog |
| Mechanical Properties and Power | |
| IP Rating | IP55 |
| Material | Outdoor UV stabilized enclosure |
| Dimensions (W x D x H) | 127 x 63 x 254 mm |
| Weight | 366g |
| Installation | Pole mounting or wall mounting |
| Power Requirement | LAN1 • 24V DC, 1A / Passive PoE • Pin 4,5 V DC+ • Pin 7,8 V DC- • Pin 3 Reset |
| Power Consumption | 12W |
| Environmental Features and Certification | |
| Operating Temperature | -20~70°C |
| Operating Humidity | 10~95% non-condensing |
| Regulatory | CE, FCC, RoHS |
