Opens 5 GHz wireless access in rough outdoor conditions.

An outdoor access point in an IP67-rated aluminum housing. It runs between -30 and 75 °C, and its two N-type connectors accept high-gain antennas.

300 Mbps802.11n (40 MHz) data rate

5 GHzFrequency Band

IP67Protection Grade

-30 ~ 75 °COperating Temperature

7.68 WPower consumption

2.4 kgAluminum housing weight

Key features

300Mbps

802.11n link speed

The 802.11n 2T2R mode reaches this rate at 40 MHz channel width.

27dBm

802.11a output power

Output power steps between 3 and 27 dBm.

8SSIDs

Separate wireless networks

It keeps user groups on separate wireless networks.

60clients

Wireless client capacity

Access point mode carries this many wireless clients.

2connectors

N-type external antenna input

The female connectors accept high-gain antennas.

IN DAILY USE

Rough weatherThe aluminum housing keeps it working through rain, wind and snow.

Single-cable power802.3af PoE carries data and power over one UTP cable.

Simple setupA web interface and step-by-step wizard walk through the first settings.

Usage AreasBuilding-to-building links·Campuses·Rural areas

Hardware Specifications

Standard Support

IEEE 802.11a/n Wireless LAN
IEEE 802.11i Wireless Security
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Ethernet
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet / PD

Memory

32 Mbytes DDR SDRAM
8 Mbytes Flash

Interface

Wireless IEEE 802.11a/n, 2T2R
LAN: 1 x 10/100Base-TX, Auto-MDI/MDIX, IEEE 802.3af PoE/PD port
WAN: 1 x 10/100Base-TX, Auto-MDI/MDIX, Passive PoE/PSE port up to 7W

Antenna

N-Type Female connector x 2

Wireless RF Specifications

Wireless Technology

IEEE 802.11a
IEEE 802.11n

Data Rate

IEEE 802.11a: 54, 48, 36, 24, 18, 12, 9 and 6Mbps
IEEE 802.11n (20MHz): up to 150Mbps
IEEE 802.11n (40MHz): up to 300Mbps

Media Access Control

CSMA / CA

Modulation

Transmission / Emission Type: OFDM
Data modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM

Frequency Band

5.180GHz ~ 5.825GHz

Operating Channels

5.180GHz	CH36	5.580GHz	CH116
5.200GHz	CH40	5.600GHz	CH120
5.220GHz	CH44	5.620GHz	CH124
5.240GHz	CH48	5.640GHz	CH128
5.260GHz	CH52	5.660GHz	CH132
5.280GHz	CH56	5.680GHz	CH136
5.300GHz	CH60	5.700GHz	CH140
5.320GHz	CH64	5.745GHz	CH149
5.500GHz	CH100	5.765GHz	CH153
5.520GHz	CH104	5.785GHz	CH157
5.540GHz	CH108	5.805GHz	CH161
5.560GHz	CH112	5.825GHz	CH165

The above 24 channels are theoretically defined. Actual implementation will vary depending on regulations in different regions and countries.

RF Output Power

IEEE 802.11a: 27 ± 1dBm
IEEE 802.11n: 24 ± 1dBm

Receiver Sensitivity

IEEE 802.11a: -91dBm
IEEE 802.11n: -92dBm

Output Power Control

3~27dBm

Software Features

LAN

Built-in DHCP server supporting static IP address distribution
Supports 802.1d STP (Spanning Tree Protocol)

WAN

Static IP
Dynamic IP
PPPoE
PPTP
L2TP
IPSec

Operation Mode

Bridge
Gateway
WISP

Firewall

NAT firewall with SPI (Stateful Packet Inspection)
Built-in NAT server supporting Virtual Server and DMZ
Built-in firewall with Port / IP address / MAC / URL filtering

Wireless Mode

AP
Client
WDS PTP
WDS PTMP
WDS Repeater (AP+WDS)

Channel Width

20MHz / 40MHz

Wireless Isolation

Enable to isolate each connected wireless client from communicating with each other.

Encryption

64/128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X

Wireless Security

Provides Wireless LAN ACL (Access Control List) filtering
Wireless MAC address filtering
Supports WPS (WIFI Protected Setup)
Enable / Disable SSID Broadcast

Multiple SSID

Max. Wireless Client

Max. WDS AP

Up to 2

Max. Wired Client

WMM

Supports Wi-Fi Multimedia

QoS

Supports Quality of Service for bandwidth control

NTP

Network Time Management

Management

Web UI, DHCP Client, Configuration Backup & Restore, Dynamic DNS, SNMP

Diagnostic Tool

System Log, Ping Watchdog

Mechanical & Power

Ingress Protection (IP)

IP67

Material

Aluminum

Dimensions (W x D x H)

239 x 269 x 80 mm

Weight

2.4kg

Installation

Pole mounting or Wall mounting

Power Requirements

AP: IEEE 802.3af PoE / 48VDC input (PoE Injector included)
PoE Injector: 100~240VAC

Power Consumption

7.68W

Environment & Certification

Operation Temperature

-30~75°C

Operating Humidity

10~95% non-condensing

Regulatory

CE / RoHS

Standard Accessories

48VDC 802.3af PoE injector & Power cord x 1
Mounting Kit x 1
Waterproof RJ-45 Connector Kit x 2
Quick Installation Guide x 1
CD (User's Manual, Quick Installation Guide) x 1

Opens 5 GHz wireless access in rough outdoor conditions.

An outdoor access point in an IP67-rated aluminum housing. It runs between -30 and 75 °C, and its two N-type connectors accept high-gain antennas.

300 Mbps802.11n (40 MHz) data rate

5 GHzFrequency Band

IP67Protection Grade

-30 ~ 75 °COperating Temperature

7.68 WPower consumption

2.4 kgAluminum housing weight

Key features

300Mbps

802.11n link speed

The 802.11n 2T2R mode reaches this rate at 40 MHz channel width.

27dBm

802.11a output power

Output power steps between 3 and 27 dBm.

8SSIDs

Separate wireless networks

It keeps user groups on separate wireless networks.

60clients

Wireless client capacity

Access point mode carries this many wireless clients.

2connectors

N-type external antenna input

The female connectors accept high-gain antennas.

IN DAILY USE

Rough weatherThe aluminum housing keeps it working through rain, wind and snow.

Single-cable power802.3af PoE carries data and power over one UTP cable.

Simple setupA web interface and step-by-step wizard walk through the first settings.

Usage AreasBuilding-to-building links·Campuses·Rural areas

Hardware Specifications

Standard Support

IEEE 802.11a/n Wireless LAN
IEEE 802.11i Wireless Security
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Ethernet
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet / PD

Memory

32 Mbytes DDR SDRAM
8 Mbytes Flash

Interface

Wireless IEEE 802.11a/n, 2T2R
LAN: 1 x 10/100Base-TX, Auto-MDI/MDIX, IEEE 802.3af PoE/PD port
WAN: 1 x 10/100Base-TX, Auto-MDI/MDIX, Passive PoE/PSE port up to 7W

Antenna

N-Type Female connector x 2

Wireless RF Specifications

Wireless Technology

IEEE 802.11a
IEEE 802.11n

Data Rate

IEEE 802.11a: 54, 48, 36, 24, 18, 12, 9 and 6Mbps
IEEE 802.11n (20MHz): up to 150Mbps
IEEE 802.11n (40MHz): up to 300Mbps

Media Access Control

CSMA / CA

Modulation

Transmission / Emission Type: OFDM
Data modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM

Frequency Band

5.180GHz ~ 5.825GHz

Operating Channels

5.180GHz	CH36	5.580GHz	CH116
5.200GHz	CH40	5.600GHz	CH120
5.220GHz	CH44	5.620GHz	CH124
5.240GHz	CH48	5.640GHz	CH128
5.260GHz	CH52	5.660GHz	CH132
5.280GHz	CH56	5.680GHz	CH136
5.300GHz	CH60	5.700GHz	CH140
5.320GHz	CH64	5.745GHz	CH149
5.500GHz	CH100	5.765GHz	CH153
5.520GHz	CH104	5.785GHz	CH157
5.540GHz	CH108	5.805GHz	CH161
5.560GHz	CH112	5.825GHz	CH165

The above 24 channels are theoretically defined. Actual implementation will vary depending on regulations in different regions and countries.

RF Output Power

IEEE 802.11a: 27 ± 1dBm
IEEE 802.11n: 24 ± 1dBm

Receiver Sensitivity

IEEE 802.11a: -91dBm
IEEE 802.11n: -92dBm

Output Power Control

3~27dBm

Software Features

LAN

Built-in DHCP server supporting static IP address distribution
Supports 802.1d STP (Spanning Tree Protocol)

WAN

Static IP
Dynamic IP
PPPoE
PPTP
L2TP
IPSec

Operation Mode

Bridge
Gateway
WISP

Firewall

NAT firewall with SPI (Stateful Packet Inspection)
Built-in NAT server supporting Virtual Server and DMZ
Built-in firewall with Port / IP address / MAC / URL filtering

Wireless Mode

AP
Client
WDS PTP
WDS PTMP
WDS Repeater (AP+WDS)

Channel Width

20MHz / 40MHz

Wireless Isolation

Enable to isolate each connected wireless client from communicating with each other.

Encryption

64/128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X

Wireless Security

Provides Wireless LAN ACL (Access Control List) filtering
Wireless MAC address filtering
Supports WPS (WIFI Protected Setup)
Enable / Disable SSID Broadcast

Multiple SSID

Max. Wireless Client

Max. WDS AP

Up to 2

Max. Wired Client

WMM

Supports Wi-Fi Multimedia

QoS

Supports Quality of Service for bandwidth control

NTP

Network Time Management

Management

Web UI, DHCP Client, Configuration Backup & Restore, Dynamic DNS, SNMP

Diagnostic Tool

System Log, Ping Watchdog

Mechanical & Power

Ingress Protection (IP)

IP67

Material

Aluminum

Dimensions (W x D x H)

239 x 269 x 80 mm

Weight

2.4kg

Installation

Pole mounting or Wall mounting

Power Requirements

AP: IEEE 802.3af PoE / 48VDC input (PoE Injector included)
PoE Injector: 100~240VAC

Power Consumption

7.68W

Environment & Certification

Operation Temperature

-30~75°C

Operating Humidity

10~95% non-condensing

Regulatory

CE / RoHS

Standard Accessories

48VDC 802.3af PoE injector & Power cord x 1
Mounting Kit x 1
Waterproof RJ-45 Connector Kit x 2
Quick Installation Guide x 1
CD (User's Manual, Quick Installation Guide) x 1

IP67 5GHz 300Mbps 802.11a/n Wireless Outdoor Access Point

Datasheet

WNAP-7350

Firmware

WNAP-7350

Kullanım Kılavuzu

WNAP-7350

WNAP-7350

Hızlı Kurulum Kılavuzu

WNAP-7350

WNAP-7350

WNAP-7350

Fotoğraf

WNAP-7350

Similar Products

IP55 802.11b/g/n 2.4GHz, 300Mbps Outdoor WLAN CPE, 2 x RP-SMA Connector

IP55 802.11ac, 5GHz 900Mbps Outdoor Wireless CPE

Outdoor 5G Wireless video transmission device (CPE)

Metrolinq™ Alignment Scope, 9x50 Magnification Accessory

IP67 5GHz 300Mbps 802.11a/n Wireless Outdoor Access Point

Datasheet

WNAP-7350

Firmware

WNAP-7350

Kullanım Kılavuzu

WNAP-7350

WNAP-7350

Hızlı Kurulum Kılavuzu

WNAP-7350

WNAP-7350

WNAP-7350

Fotoğraf

WNAP-7350

Similar Products

IP55 802.11b/g/n 2.4GHz, 300Mbps Outdoor WLAN CPE, 2 x RP-SMA Connector

IP55 802.11ac, 5GHz 900Mbps Outdoor Wireless CPE

Outdoor 5G Wireless video transmission device (CPE)

Metrolinq™ Alignment Scope, 9x50 Magnification Accessory