Sounds an audible and visual alarm on a conventional fire loop.

A sounder and strobe unit made for conventional fire detection systems. It ties into a two-wire, polarity-free loop and runs on a supply between DC 16 V and DC 28 V. Its EMC-tested housing stays stable in facilities with heavy electromagnetic interference.

75 dB – 115 dB @ 3 mSound pressure

DC 16 V – DC 28 VWorking voltage

≤ 8 mAAlarm current

-10 °C ~ +55 °COperating Temperature

Wall mountInstallation

125 × 80 × 40 mmProduct dimensions

Key features

Two-wire, polarity-free wiringJoins the loop without regard to polarity and rules out reversed connections.

Loud outputThe alarm tone stays above 75 dB(A) at 3 meters and peaks at 115 dB.

Low standby currentDraws under 400 µA on standby, so one loop carries more units.

EMC resiliencePasses electromagnetic interference testing and runs steadily next to power cabling.

Corrosion-resistant contactsThe contact material resists acid and rust, and the base screws stay tight.

Certified to EN54-3:2014 and EN54-23:2010.

Technical Specification

Working Voltage

DC16V-DC28V

Rated Power

132.6mW

Current

Standby current: ≤ 400µA
Alarm current: ≤ 8mA

Alarm Mode

Visual and audible alarm

Alarm Volume

Modified Tone: 4s-5s
Sound Pressure Level: 75dB-115dB (A) at 3 m (9.84 ft)

Operating Temperature

–10°C to +55°C (+14°F to +131°F)

Operating Humidity

≤ 95% RH (no condensation)

Dimensions (with base)

125 mm × 80 mm × 40 mm (4.92" × 3.15" × 1.57")

Weight (with base)

118 g (0.26 lb)

Installation

Wall Mount

Compliance Standard

EN54-3:2014, EN54-23:2010

Sounds an audible and visual alarm on a conventional fire loop.

75 dB – 115 dB @ 3 mSound pressure

DC 16 V – DC 28 VWorking voltage

≤ 8 mAAlarm current

-10 °C ~ +55 °COperating Temperature

Wall mountInstallation

125 × 80 × 40 mmProduct dimensions

Key features

Two-wire, polarity-free wiringJoins the loop without regard to polarity and rules out reversed connections.

Loud outputThe alarm tone stays above 75 dB(A) at 3 meters and peaks at 115 dB.

Low standby currentDraws under 400 µA on standby, so one loop carries more units.

EMC resiliencePasses electromagnetic interference testing and runs steadily next to power cabling.

Corrosion-resistant contactsThe contact material resists acid and rust, and the base screws stay tight.

Certified to EN54-3:2014 and EN54-23:2010.

Technical Specification

Working Voltage

DC16V-DC28V

Rated Power

132.6mW

Current

Standby current: ≤ 400µA
Alarm current: ≤ 8mA

Alarm Mode

Visual and audible alarm

Alarm Volume

Modified Tone: 4s-5s
Sound Pressure Level: 75dB-115dB (A) at 3 m (9.84 ft)

Operating Temperature

–10°C to +55°C (+14°F to +131°F)

Operating Humidity

≤ 95% RH (no condensation)

Dimensions (with base)

125 mm × 80 mm × 40 mm (4.92" × 3.15" × 1.57")

Weight (with base)

118 g (0.26 lb)

Installation

Wall Mount

Compliance Standard

EN54-3:2014, EN54-23:2010

Conventional Sounder Strobe

Datasheet

HY-C151

Kullanım Kılavuzu

HY-C151

HY-C151

Teknik Çizim

HY-C151

Fotoğraf

HY-C151

Similar Products

Conventional Manual Call Point

Fire Alarm Bell

Conventional Sounder Strobe

Datasheet

HY-C151

Kullanım Kılavuzu

HY-C151

HY-C151

Teknik Çizim

HY-C151

Fotoğraf

HY-C151

Similar Products

Conventional Manual Call Point

Fire Alarm Bell