
Stock Code: ECS2100-28PP










| General | |
|---|---|
| Model | ECS2100-28PP |
| Brand | Edgecore |
| Product Type | L2+ Managed PoE Switch |
| Ports | |
| RJ-45 10/100/1000 Ports | 24 |
| SFP Uplink Ports | 4 (1G) |
| PoE Ports | 24 |
| Console Port | 1 |
| Performance | |
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.7 Mpps |
| Flash Memory | 32 MB |
| DRAM | 256 MB |
| Packet Buffer | 4.1 Mbits |
| MAC Address Table | 8 K |
| Jumbo Frames | 10 K |
| MTBF | 370,636 hrs |
| Heat Dissipation | 1678.743 Btu/H |
| Acoustic Noise | 49.7 dB(A) |
| Power Supply | |
| Power Supply | 100-240 VAC, 50-60 Hz |
| Max. System Power Consumption | 490 W |
| PoE | |
| PoE Standard | IEEE 802.3af (15.4 W) / IEEE 802.3at (30 W) on each port |
| PoE Power Budget | 370 W |
| PoE Timer | Yes |
| Dynamic Power Allocation | Yes |
| Power Budget Overload | Auto disable after exceeding power budget |
| Mechanical | |
| Rack Space | 19" |
| Form Factor | Rackmount |
| Dimensions (W × D × H) | 44 × 22 × 4.4 cm (17.3 × 8.6 × 1.7 in) |
| Weight | 3.1 kg (6.85 lb) |
| Environmental | |
| Operating Temperature | 0 ~ 45°C |
| Storage Temperature | -40 ~ 70°C |
| Altitude | 3000 m |
| Operating Humidity (Non-condensing) | 10% to 90% |
| Storage Humidity (Non-condensing) | 10% to 90% |
| WEEE | Compliant |
| RoHS | Compliant |
| L2 Features | |
| RJ-45 Port Support | 10BASE-T (IEEE 802.3), 100BASE-TX (IEEE 802.3u), 1000BASE-T (IEEE 802.3ab) |
| SFP Port Support | IEEE 802.3u (100BASE-FX) and IEEE 802.3z (1000BASE-SX/LX/LHX/ZX) transceivers; Digital Diagnostic Monitoring (DDM) on 1G SFP port |
| Flow Control | IEEE 802.3x for full-duplex mode; back-pressure for half-duplex mode |
| Spanning Tree | IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP (64 instances); Loopback Detection; BPDU Filter/Guard; BPDU Forward; Root Guard |
| VLAN | 4K IEEE 802.1Q VLANs; port-based / MAC-based / IEEE 802.1v (protocol-based) VLAN; Guest VLAN; Auto Voice VLAN; Q-in-Q |
| Link Aggregation | Static trunk; IEEE 802.3ad (802.1ax) LACP |
| IGMP / MLD Snooping | IGMPv1/v2/v3 snooping, IGMP filtering/throttling, IGMP queries, immediate leave, MLD snooping |
| Other L2 Features | LLDP/LLDP-MED; Green-Saving (IEEE 802.3az / cable length / no-link power saving); cable diagnostics; mDNS; IP Clustering (software stacking) |
| L3 and IPv6 | |
| L3 Features | Static routing; RIP |
| IPv6 | IPv4/IPv6 dual protocol stack; IPv6 management; IPv6 Ping/Trace, Telnet, Syslog, TFTP; HTTP and SNMP over IPv6 |
| QoS Features | |
| QoS | Rate limiting (ingress/egress, port-based) 64 Kbps ~ 1000 Mbps, 16 Kbps resolution; priority queue scheduling (WRR / Strict Priority / Hybrid); port-based QoS; IPv4/IPv6 DSCP; DiffServ; Auto VoIP; 8 hardware queues per port; dynamic QoS |
| Security | |
| Security | DDoS protection; CPU Guard (CPU protection); port isolation; port mirror (one-to-one, one-to-many); remote mirror; storm control (broadcast/multicast/unknown); IEEE 802.1X; ACL (ingress only, L2/L3/L4, 512 entries, IPv4/IPv6, TCP/UDP-based and MAC-based); port security; MAC filter; MAC authentication; max address count per port; dynamic VLAN assignment; dynamic ARP inspection; AAA (RADIUS/TACACS+); IP Source Guard; SSH v1.5/v2.0; SSL v1/v2/v3; sFlow; Web authentication |
| Management | |
| Management | Console / Web / Telnet / SNMP v1/v2c/v3 access; standard and private MIB; SNMP Trap; RMON (groups 1, 2, 3 and 9); NTP/SNTP; dual image and configuration; configuration and firmware upload/download via HTTP/TFTP/FTP/SFTP; auto firmware upgrade; system password protection; DHCPv4/v6 client; DHCP Snooping (Option 82); dynamic provision (Option 66, 67); DHCP Relay v4/v6; event/error log and syslog; memory flash log; DNS client |
| Cloud Management | ecCloud supported |
| Certifications | |
| Safety | CSA (CSA 22.2 No. 60950-1 & UL 60950-1); CB (IEC/EN 60950-1) |
| Electromagnetic Compatibility | CE Mark; FCC Class A; EN55022 (CISPR 22) Class A; EN61000-3-2/3; VCCI |




