Stock Code: MS-POE
| Environmental Specifications | |
|---|---|
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -20°C to +60°C |
| Operating Relative Humidity (% RH non-condensing) | 90% (10°C to 35°C) |
| 75% (35°C to 45°C) | |
| Shock and Vibration | Random, 2 g, 5 Hz-500 Hz (Class 2); 1 m drop test with and without wiremap adapter attached |
| Safety | IEC 61010-1 3rd Edition |
| Altitude | Operating: 4,000 m Storage: 12,000 m |
| EMC | IEC 61326-1 |
| General Specifications | |
| Test Connector | Shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs. |
| Power | Battery Type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries |
| Battery Life: 20 hours of typical use | |
| Other Compatible Battery Types: 2 AA photo lithium, NiMH, NiCd | |
| Dimensions and Weight | 7.6 cm x 16.3 cm x 3.6 cm - 247 g |
| Display | Backlit monochrome LCD |
| Test Modes | |
| Cable Test | Measures length, verifies wiremap, identifies remote ID locators, detects Ethernet ports. MicroScanner PoE also shows HIGH Ω when the cable resistance is more than 12.5 Ω. Displays results on a single device. |
| Toner | Generates IntelliTone and normal analog toning signals. |
| PoE | Solicits and detects the presence of 802.3af, at, and bt devices. |
| Performance Specifications | |
| Tested Cable Types | Twisted pair: UTP, FTP, SSTP |
| Length Test | Range: 460 m |
| Resolution: 0.3 m | |
| Typical Accuracy: ±4% or 0.6 m (whichever is greater). NVP uncertainty is an additional error. | |
| Calibration: Can determine actual NVP with known cable length. | |
| Cable Fault Detection Test | Detects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs. The wiremap is drawn to proportional length to visually indicate the approximate location of faults. |
| Ethernet Port Detection | Detects the advertised speed of 802.3 Ethernet ports at 10 Mbps, 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps, and 10 Gbps. |
| Toner Generator | Supports toning and cable mapping with a Fluke Networks digital IntelliTone™ probe. Generates four tones compatible with typical analog probes. SmartTone™ feature gives positive identification of cables in bundles when using an IntelliTone or an analog probe. |
