Tests copper and coax runs, measures their length and traces the cable.

A multifunction test kit that measures length with TDR, verifies the wire map and traces cables with a probe. It brings installation acceptance and fault finding on structured cabling into one unit.

1 ~ 350 mLength measurement range

± 5%Measurement accuracy

RJ45 / RJ12 / FConnector Type

8 recordsMemory

9 VPower supply

0 ~ 50 °COperating Temperature

Key features

350m

Length measurement on long runs

TDR measures runs starting from 1 meter.

±5%

Measurement accuracy

It reports the distance to an open or short circuit within this accuracy.

8records

Test memory

It keeps the most recent field results in memory.

64 x 33mm

Backlit LCD

The display module shows the result in dark environments as well.

Battery-powered field use

It powers off in any mode and reports a low battery condition.

0 ~ 50°C

Operating temperature

Storage covers -10°C to 60°C and humidity 10% to 90% non-condensing.

IN THE FIELD

Finds hidden cableIt generates two tracing tones, and the probe follows hidden cables and tells them apart.

Keeps cabling organizedTerminator ID identification simplifies cable placing and routing.

Protects the inputProtection against excess voltage, transients and the ringer signal keeps the unit safe.

Split pair testing requires a cable length of at least 1 meter.

Technical Specifications

Name

Cable Tester With Probe

Display

LCD Module (64 mm x 33 mm)

Connector Type

RJ45, RJ12 (RJ11) & F connector

Button

(1) LAN. (2) TEL. (3) COAX. (4) TONE. (5) LENGTH. (6) TEST. (7) POWER. (8) ▲. (9) ▼. (10) ◄. (11) ►. (12) MEMORY. (13) SETUP.

Cable Type

Shielded or unshielded, CAT-5, CAT-6, CAT-7

Error Status

Open circuit, short circuit, cross circuit and split pairs

Measure Types

Measures cable length via TDR
Checks and verifies wire map
Generates two different tracing tones to help identify cables

Cable Length & Accuracy

Accuracy of the length measurement is ± 5%
Length: 1~350 meters (3~1200 feet)

Minimum Cable Length for Testing of Split Pairs

1 meter (3 feet)

Power Source

9 Volt battery
Detects a low battery condition

Automatic Shut-off

Auto-off in any mode and low power consumption for long battery life

Input Protection

Protection against excess voltage, transients and ringer signal

Physical Dimension

230 mm (L), 60 mm (W), 28 mm (H)
195 mm (L), 90 mm (W), 40 mm (H)

Environmental

Operating Temperature: 0°C to 50°C (32°F to 122°F)
Storage Temperature: -10°C to 60°C (14°F to 140°F)
Humidity: 10% to 90% non-condensing

Accessories

F to BNC Adapter * 2 pcs, 9 Volt battery * 2 pcs, RJ45/RJ11 Adapter
Belt Clip * 1 pcs, BAG * 1 pcs