Stock Code: WGS-4215-16P2S
| General Information | |
|---|---|
| Product Type | Industrial 16-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Wall-mounted Managed Switch |
| Network Specifications | |
| Fiber Ports | 2 x 100/1000BASE-X mini-GBIC/SFP ports |
| Connector | • Removable 3-pin terminal block for power input • Pin 1/2 for power (Pin 1: V+ / Pin 2: V-) • Pin 3 for earth ground • DC power jack with 2.1mm central pole |
| MAC Address Table | 8K entries |
| Port Mirroring | • TX / RX / Both • Many-to-1 monitor • Up to 4 sessions |
| VLAN | • 802.1Q tagged VLAN • 802.1ad Q-in-Q tunneling (VLAN stacking) • Voice VLAN • Protocol VLAN • Private VLAN (protected port) • GVRP • Management VLAN • Up to 256 VLAN groups out of 4094 VLAN IDs |
| Port Security | • IEEE 802.1X port-based authentication • Built-in RADIUS client to co-operate with RADIUS server • RADIUS/TACACS+ user access authentication |
| LED Indicators | |
| Power LED | Power (Green) |
| PoE Port LEDs (Ports 1 to 16) | • PoE-in-Use (Amber) • LNK/ACT (Green) |
| SFP Port LEDs (Ports 17 to 18) | • 1000 LNK/ACT (Green) • 100 LNK/ACT (Amber) |
| Power Supply | |
| Power Input | • 48~54V DC, 5.8 A (max.) terminal block power input • 48~54V DC, 5.8 A (max.) DC jack power input • Note: The two power input interfaces do not support power redundancy. |
| Power Consumption / Dissipation | Max. 276 W / 941 BTU |
| PoE Standard | IEEE 802.3af / IEEE 802.3at Power over Ethernet PSE |
| PoE Power Supply Type | End-span |
| PoE Power Output | • IEEE 802.3af: per port 48V~54V DC, max. 15.4 W • IEEE 802.3at: per port 50V~54V DC, max. 36 W |
| Power Pin Assignment | 1/2(+), 3/6(-) |
| PoE Power Budget | 240 W (depending on power input) |
| Mechanical Specifications | |
| Mounting | Fixed wall mount, magnetic wall mount or DIN rail |
| Installation Options | Fixed wall mount, magnetic wall mount or DIN rail |
| Dimensions and Weight | |
| Weight | 929 g |
| Environmental Conditions | |
| Operating Temperature | -10°C ~ 60°C |
| Operating Temperature | -10°C ~ 60°C |
| Operating Humidity | 5% ~ 95% (non-condensing) |
| Storage Temperature | -40°C ~ 85°C |
| Storage Humidity | 5% ~ 95% (non-condensing) |
| Other Specifications | |
| Copper Ports | 16 x 10/100/1000BASE-T Gigabit RJ45, auto-MDI/MDI-X |
| PoE Ports | 16 x IEEE 802.3at PoE+ injector ports |
| PoE Budget | 240 W |
| RJ45 Copper Ports | 16 x 10/100/1000BASE-T Gigabit RJ45 copper ports |
| PoE Inject Ports | 16 x 802.3at PoE+ injector ports (Ports 1 to 16) |
| SFP / mini-GBIC Ports | 2 x 100/1000BASE-X SFP interfaces, supporting 100/1000 Mbps dual mode |
| Reset Button | • < 5 sec: System reboot • > 5 sec: Factory default |
| Dimensions (W x D x H) | 245 x 24.4 x 140 mm |
| Enclosure | IP30 metal case |
| ESD Protection | • Contact discharge: 6KV DC • Air discharge: 8KV DC |
| Switch Architecture | Store-and-Forward |
| Switch Fabric | 36Gbps, non-blocking |
| Switch Throughput | 26.78Mpps @64 bytes |
| Shared Data Buffer | 4.1 megabits |
| Flow Control | • IEEE 802.3x pause frame for full duplex • Back pressure for half duplex |
| Jumbo Frame | 10 Kbytes |
| Supported PD Quantity | • Class 2: max. 16 • Class 3: max. 16 • Class 4: max. 9 |
| PoE Management | • PD Alive Check • Scheduled Power Recycling • PoE Schedule • PoE Usage Monitoring • PoE Extension |
| Enhanced PoE Mode | Standard / Legacy / Force |
| PoE Extend Mode | Yes, up to 250 meters max. |
| Link Aggregation | • IEEE 802.3ad LACP and static trunk • Supports 8 groups with 8 ports per trunk |
| Spanning Tree Protocol | • IEEE 802.1D STP • IEEE 802.1w RSTP • IEEE 802.1s MSTP • STP BPDU guard, BPDU filtering and BPDU forwarding |
| IGMP Snooping | • IPv4 IGMP v2/v3 snooping • IGMP querier • Up to 256 multicast groups |
| MLD Snooping | IPv6 MLD v1/v2 snooping, up to 256 multicast groups |
| Ring | Supports ERPS and complies with ITU-T G.8032; recovery time < 450 ms |
| QoS Features | • 8 mapping IDs to 8 level priority queues • Port number • 802.1p priority • DSCP/IP precedence of IPv4/IPv6 packets • Traffic classification based, strict priority and WRR • Ingress/Egress rate limit per port bandwidth control |
| Access Control List | • IPv4/IPv6 IP-based ACL / MAC-based ACL • IPv4/IPv6 IP-based ACE / MAC-based ACE • Max. 256 ACL entries |
| MAC Security | • IP-MAC port binding • MAC filter • Static MAC address, max. 256 static MAC entries |
| Enhanced Security | • DHCP Snooping and DHCP Option82 • STP BPDU guard, BPDU filtering and BPDU forwarding • DoS attack prevention • ARP inspection • IP source guard |
| Basic Management Interfaces | Web browser, Telnet, SNMP v1/v2c |
| Secure Management Interfaces | SSHv2, TLSv1.2, SNMPv3 |
| Switch Management | • Firmware upgrade by HTTP/TFTP • Configuration upload/download through HTTP/TFTP • LLDP protocol • SNTP • PLANET Smart Discovery Utility • PLANET NMS System / CloudViewer |
| Event Management | • Remote / Local Syslog • System log |
| Network Diagnostic | • ICMPv6 / ICMPv4 Ping Test • Cable diagnostic technology • SFP-DDM (Digital Diagnostic Monitor) |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Stability Testing | • IEC 60068-2-32 (free fall) • IEC 60068-2-27 (shock) • IEC 60068-2-6 (vibration) |
| IEEE Standards | • IEEE 802.3 10BASE-T • IEEE 802.3u 100BASE-TX/100BASE-FX • IEEE 802.3z Gigabit SX/LX • IEEE 802.3ab Gigabit 1000BASE-T • IEEE 802.3x Flow Control and Back Pressure • IEEE 802.3ad Port Trunk with LACP • IEEE 802.1D STP • IEEE 802.1w RSTP • IEEE 802.1s MSTP • IEEE 802.1p Class of Service • IEEE 802.1Q VLAN Tagging • IEEE 802.1x Port Authentication Network Control • IEEE 802.1ab LLDP • IEEE 802.3af PoE • IEEE 802.3at PoE+ • IEEE 802.3az EEE |
| RFC / Ring Standards | • RFC 768 UDP • RFC 783 TFTP • RFC 793 TCP • RFC 791 IP • RFC 792 ICMP • RFC 2068 HTTP • RFC 1112 IGMP v1 • RFC 2236 IGMP v2 • RFC 3376 IGMP v3 • RFC 2710 MLD v1 • RFC 3810 MLD v2 • ITU G.8032 ERPS Ring |
| Package Contents | • Quick Installation Guide x 1 • 3-pin Terminal Block Connector x 1 • Wall-mounted Kit x 1 • DIN-rail Kit x 1 • Magnet Kit x 1 • RJ45 Dust Cap x 16 • SFP Dust Cap x 2 |
