+90 212 222 87 80 nokta@noktaelektronik.net

B2B Login Technical Service

Planet

SIP Public Announcement Adapter with PoE

Name: SIP Public Announcement Adapter with PoE
Brand: Planet
SKU: VPA-100

Stock Code: VPA-100

Turns a call from an IP phone into a loudspeaker announcement.

A SIP public announcement adapter that works alongside an existing IP PBX. It distributes a call placed from an IP phone in handset, headset or hands-free mode as an announcement across a room or a floor, and its housing sits on a wall or a ceiling.

2 EthernetPort Count

Fast EthernetLink Speed

RJ45Link Type

5 V DC, 1 APower requirement

0 ~ 40 °COperating Temperature

117 x 84 x 31 mmDimensions

Key features

SIP complianceIt complies with SIP 2.0 (RFC 3261) and works with third-party SIP 2.0 compliant VoIP products.

Built-in amplifierA 3.5 W amplifier covers a whole room or floor, and the web interface sets output, speaker input and handset input levels.

Programmable outputsFour programmable output ports switch attached devices on and off; the web interface or the keypad of an IP phone controls them.

PoE powerThe LAN1 port draws power over IEEE 802.3af PoE class 3, and the LAN2 port extends the network to a second device; total draw stays at 2 W.

Multi-unit deploymentSeveral units link to each other over 100-meter cabling through a PoE switch, and one IP phone calls all of them at once when the IP PBX supports paging and intercom.

Voice codecsIt runs G.711 A-law and µ-law, G.722, G.723, G.726, G.729 and iLBC codecs.

Hardware
Voice	Microphone: 3.5mm standard interface Speaker: 3.5mm standard interface (Mono) Loudspeaker: SPK+, SPK- (Max. 26 dB)
Physical Interfaces	Two 10/100BASE-TX RJ-45 Ethernet ports LAN1: Connects to internet and provides PoE function (IEEE 802.3af) LAN2: Connects to other devices for network expansion Microphone/speaker: 3.5mm connector Terminal block for loudspeaker, power supply, ground and output ports 5VDC power supply: Max. 200mA 3.3VDC power supply: Max. 500mA Port 1-4 output voltage/current: 3.3V/8mA Reset button
Protocols and Standard
Voice Protocol and Algorithms	Protocol: UDP Voice algorithms: - G.711 A-law and µ-law - G.722/G.722.1/G.722.2 - G.723 - G.726 - G.729 - iLBC Echo cancellation noise suppression (ECN) Adaptive jitter buffer
Features
Telephony Features	One voice line Auto answer Volume adjustment: output, handset input and speaker input Full-duplex Incoming ring Audio output mode: speaker and handset
Environment
Power Requirements	5V DC, 1A IEEE 802.3af PoE class 3 Max. 2W
Operating Temperature	0 ~ 40°C
Operating Humidity	10 ~ 95% (non-condensing)
Weight	344 g
Dimensions (W x D x H)	117 x 84 x 31 mm
Emission / Certifications	CE, FCC
Connectors	Two 10/100BASE-TX RJ-45 Ethernet ports Two 3.5mm phone connectors DC power jack Terminal block

Datasheet

VPA-100

pdf2/14/2023

Firmware

VPA-100

zip2/14/2023

VPA-100

zip2/14/2023

Kullanım Kılavuzu

VPA-100

pdf2/14/2023

Hızlı Kurulum Kılavuzu

VPA-100

pdf2/14/2023

SIP Public Announcement Adapter with PoE

Stock Code: VPA-100

Turns a call from an IP phone into a loudspeaker announcement.

2 EthernetPort Count

Fast EthernetLink Speed

RJ45Link Type

5 V DC, 1 APower requirement

0 ~ 40 °COperating Temperature

117 x 84 x 31 mmDimensions

Key features

SIP complianceIt complies with SIP 2.0 (RFC 3261) and works with third-party SIP 2.0 compliant VoIP products.

Built-in amplifierA 3.5 W amplifier covers a whole room or floor, and the web interface sets output, speaker input and handset input levels.

Programmable outputsFour programmable output ports switch attached devices on and off; the web interface or the keypad of an IP phone controls them.

PoE powerThe LAN1 port draws power over IEEE 802.3af PoE class 3, and the LAN2 port extends the network to a second device; total draw stays at 2 W.

Multi-unit deploymentSeveral units link to each other over 100-meter cabling through a PoE switch, and one IP phone calls all of them at once when the IP PBX supports paging and intercom.

Voice codecsIt runs G.711 A-law and µ-law, G.722, G.723, G.726, G.729 and iLBC codecs.

Hardware
Voice	Microphone: 3.5mm standard interface Speaker: 3.5mm standard interface (Mono) Loudspeaker: SPK+, SPK- (Max. 26 dB)
Physical Interfaces	Two 10/100BASE-TX RJ-45 Ethernet ports LAN1: Connects to internet and provides PoE function (IEEE 802.3af) LAN2: Connects to other devices for network expansion Microphone/speaker: 3.5mm connector Terminal block for loudspeaker, power supply, ground and output ports 5VDC power supply: Max. 200mA 3.3VDC power supply: Max. 500mA Port 1-4 output voltage/current: 3.3V/8mA Reset button
Protocols and Standard
Voice Protocol and Algorithms	Protocol: UDP Voice algorithms: - G.711 A-law and µ-law - G.722/G.722.1/G.722.2 - G.723 - G.726 - G.729 - iLBC Echo cancellation noise suppression (ECN) Adaptive jitter buffer
Features
Telephony Features	One voice line Auto answer Volume adjustment: output, handset input and speaker input Full-duplex Incoming ring Audio output mode: speaker and handset
Environment
Power Requirements	5V DC, 1A IEEE 802.3af PoE class 3 Max. 2W
Operating Temperature	0 ~ 40°C
Operating Humidity	10 ~ 95% (non-condensing)
Weight	344 g
Dimensions (W x D x H)	117 x 84 x 31 mm
Emission / Certifications	CE, FCC
Connectors	Two 10/100BASE-TX RJ-45 Ethernet ports Two 3.5mm phone connectors DC power jack Terminal block