An SC/PC connector for Ø2.0 mm cable. It terminates the end of a single mode (SM) fiber link and combines a zirconia ferrule with a stainless steel ferrule body.
0.3dB
Low insertion loss
Insertion loss stays below 0.3 dB, so signal attenuation at the joint remains limited.
45dB
Surface that suppresses back reflection
The PC polished ferrule end face keeps return loss above 45 dB.
125.5µm
Fiber hole size
The ferrule fiber hole is 125.5 µm in diameter; the ferrule is zirconia and the ferrule body is stainless steel.
57mm
Overall body dimension
The overall length is approximately 57 mm with a connector body length of 24.7 mm, and the front face measures 7.35 × 8.95 mm.
Ø2.0mm
Blue sleeve and boot
The sleeve and the boot are blue, and the boot is UL94 V0 rated thermoset.
