An ST/PC connector prepared for Ø0.9 mm cable. It terminates the end of a single mode (SM) fiber link and works with a zirconia ceramic ferrule and a metal rear body.
ST/PCconnector type
Single Modefiber type
< 0.3 dBinsertion loss
> 45 dBreturn loss
Ø0.9 mmboot diameter
Key features
0.3dB
Low insertion loss
Insertion loss stays below 0.3 dB, so signal attenuation at the joint remains limited.
45dB
Surface that suppresses back reflection
The PC polished ferrule end face keeps return loss above 45 dB.
Ø2.50mm
Zirconia ceramic ferrule
The ferrule is zirconia ceramic and the ferrule protrusion measures 7.9 mm.
43.7mm
Overall body dimension
The overall length is approximately 43.7 mm, with front-end diameters of Ø9.4 mm and Ø5.4 mm.
Ø0.9mm
Yellow 900 µm boot
The boot is UL94 V-0 rated thermoplastic and comes in yellow for 900 µm cable.
Installation and package
Ships with a dust capThe package includes connector components along with a dust cap.
RoHS compliant componentsAll components of the connector are RoHS compliant.
Metal rear bodyThe rear body and the coupling nut are die cast zinc, plated Ni over Cu.
