Stock Code: INJ-101GT++-60W
| General | |
|---|---|
| Model | INJ-101GT++-60W |
| Product Description | Industrial 1-port Gigabit High Power PoE++ Injector |
| Standards Compliance | Fully compliant with IEEE 802.3at / IEEE 802.3af |
| Physical Ports | |
| RJ-45 Ethernet Port Input | 1 |
| RJ-45 Ethernet Port with P.S.E. Output | 1 |
| Port Speed | 1 × 10/100/1000Base-T(X) |
| Operating Voltage | |
| Input Voltage | 50 ~ 57 VDC on 4-pin terminal block |
| LED Indicators | |
| Power Indicator | PWR: 1 × LED Green On: Power is on and functioning normally |
| PoE Indicators | 1 × LED Blue On: PoE Device Link Off: No PoE Device Detected Blink (Blue): Overload present |
| PoE Mode | |
| DIP Switch 1/2 [Note 1] | DIP Switch 1/2 (OFF): PoE P.S.E. set to master and Asynchronous mode DIP Switch 1/2 (ON): PoE P.S.E. set to Synchronous mode (default) |
| Note 1 | (1) By default, the output of the high power PoE++ is in Sync mode, which supports PoE af/at-compliant P.D. devices. (2) If you cannot enable the 60 W PTZ camera, please set the DIP switch to Async mode and reconnect power. This mode only supports Dual P.D. mode; an af/at-compliant P.D. device cannot be connected in this mode. |
| Power | |
| Input Power | 50 ~ 57 VDC on 4-pin terminal block |
| Power Consumption | 1 W (not including P.D. device) |
| PoE Power Budget | 60 W max. |
| Protection | |
| Short Circuit Protection | Present |
| Over Load Protection | Present |
| Physical Characteristics | |
| Enclosure | IP-30 |
| Dimensions (W × D × H) | 26.1 (W) × 70 (D) × 95 (H) mm (1.03 × 2.76 × 3.74 inch) |
| Weight | 188 g |
| Mounting | DIN-Rail and Wall Mount |
| Environmental | |
| Storage Temperature | -40 ~ 85 °C (-40 ~ 185 °F) |
| Operating Temperature | -40 ~ 75 °C (-40 ~ 167 °F) |
| Operating Humidity | 5% ~ 95% Non-condensing |
| Regulatory Approvals | |
| EMC | EN55032, EN55024 (CE EMC), FCC Part 15B, EN61000-3-2, EN61000-3-3 |
| EMI | CISPR 32, EN55032, FCC Part 15B class A |
| EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8 (PFMF), EN61000-4-11 (DIP) |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-31 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Other | |
| MTBF | 3923869 hrs |
| Warranty | 5 years |
| Packing List | |
| Package Contents | INJ-101GT++-60W × 1 QIG × 1 DIN-Rail Kit × 1 Wall-mount Kit × 1 |
| Optional Accessories (can be purchased separately) | DR/SDR/DRP series DIN-Rail power supply |
