| General |
|---|
| Product Code | FO112SA |
| Fiber Count | 12 |
| Fiber Type | 9/125 |
| Mode Type | Single Mode |
| Cable Construction | Single-tube |
| Armour | Steel armoured |
| Installation Type | Aerial |
| Cable — Mechanical and Environmental Tests |
|---|
| Tensile Strength at Break | >1.2 kN (EN 60794.1.E1) |
| Breaking Tensile Strength | >1.5 kN (EN 60794.1.E1) |
| Crush Resistance | >200 N/cm (EN 60794.1.E3) |
| Repeated Bending Radius | <20×D mm (EN 60794.1.E6) |
| Single Bending Radius | <15×D mm (EN 60794.1.E6) |
| Torsion | Positive; +90°C, 8 (EN 187 000 M 508) |
| Impact | >1 kN (EN 187000 M 504) |
| Temperature | EN 60794.1.E11 |
| Outer Sheath |
|---|
| Density | >20 g/cm³ (ASTM D 638) |
| Tensile Strength at Break | >400 N/mm² (ASTM D 638) |
| Elongation at Break | 2/10 (ASTM D 1693) |
| E.S.C.R. (10% Igepal C-630) | 2/10; >500 hours (ASTM D 746) |
| Breaking Cold | 2.5+0.5; <-75°C (ASTM D 1603) |
| Carbon Black Rate | <0.950 % (ASTM D 792 Method A) |
| Oxygen Induction Time | >25; 200°C (IEC 811.4.2 B) |
| Tube Gel |
|---|
| Density (25°C) | +0.05 g/cm³ (DIN 51 757) |
| Drop Point (24 hours) | Appropriate; °C (IEC 811.5.1 B) |
| Drip Point (24 hours) | >70 °C (REA PE 39) |
| Flash Point | >230 °C (ISO 2592) |
| Oil Separation (150°C, 24 hours) | 0 % (FTM STD 791 C) |
| Volatility | <2 % (FTM STD 791 C) |
| Water Amount | <0.05 % (DIN 51 777) |
| Acid Value (100°C) | <0.01 % mg KOH/g (DIN 53 402) |
| Abrasion | Positive (IEC 811.5.1) |
| Penetration (25°C / -30°C) | >150 1/10 mm (ISO 2137) |
| Oxygen Induction Time (180°C) | >20 minutes (IEC 811.4.2 B) |
| 100-500 V (100°) | >10 Ω×m (ASTM D 1169) |
| 100-500 V (23°) | Ω×m (ASTM D 1169) |
| Loose Tube |
|---|
| Loose Tube Value | >10,11 |
| Density | 1.31+0.03 g/cm³ (ISO 1183) |
| Water Absorption (23°C) | <0.45 % (DIN 53 495) |
| Tensile Strength at Break | <30 N/mm² (ISO 527) |
| Elongation at Break | >50 % (ISO 527) |
| E-Modulus | >2200 N/mm² (ISO 527) |
| Shore Hardness | >78 Shore D (DIN 53 505) |
| Melting Temperature (DSC) | >220 °C (ISO 3146 C) |
| Linear Thermal Expansion Coefficient (-23 … +80°C) | <1.3 °K-1 x10-4 |
| E-Glass Yarn |
|---|
| Density | offered (g/cm³) |
| Tensile Strength at Break | offered (%) |
| Elongation at Break | offered (N/mm²) |
| E-Modulus | offered (%) |
| Armouring |
|---|
| Steel Thickness | 0.155±0.015 nm (ASTM A 623 M) |
| Tensile Strength at Break | >300 N/mm² (ASTM E 6892) |
| Elongation at Break | >15 % (ASTM E 6892) |
| Thickness of Coating | >0.050±0.01 nm (ASTM A 623 M) |
| DC Resistance | <40 ohm/km (ASTM A 6892) |
| Warranty |
|---|
| Warranty | ORing Networking fiber products carry a lifetime warranty. |
