Stock Code: ECS4510-28T
| General Information | |
|---|---|
| Product Model | ECS4510-28T |
| Product Series | ECS4510 Series |
| Product Name | L2+ Gigabit Ethernet Stackable Switch |
| Brand | Edgecore |
| Country of Origin | Taiwan (TAA Compliant) |
| Network Specifications | |
| RJ-45 10/100/1000 Ports | 24 (10/100/1000BASE-T) |
| 100/1000 SFP Ports | 0 |
| 10/100/1000 Combo Ports | 0 |
| SFP Uplink Ports | 2 x SFP+ 10 Gigabit uplink |
| 10G SFP+ Expansion Module Slots | 1 |
| PoE Ports | 0 |
| RJ-45 Console Port | 1 |
| Switching Capacity | 128 Gbps |
| Forwarding Rate | 95.23 Mpps |
| Flash Memory | 128 MB |
| DRAM | 256 MB |
| MAC Address Table | 16K |
| Jumbo Frames | 10K |
| Auto-negotiation, Auto-MDI/MDIX | Yes |
| PoE Standard | Not supported |
| Power Supply | |
| Power Input | 100-240 VAC, 50/60 Hz |
| Max. System Power Consumption | 35 W |
| Mechanical Specifications | |
| Rack Space | 19" |
| Dimensions and Weight | |
| Dimensions (W × D × H) | 44 x 31.5 x 4.4 cm |
| Weight | 3.7 kg |
| Environmental Conditions | |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Storage Humidity | 10% to 90% (non-condensing) |
| Certifications | |
| Electromagnetic Compatibility | • FCC Class A • CE |
| Safety Compliance | • CB • UL |
| Environmental Regulation Compliance | • WEEE • RoHS |
| Management and Software Features | |
| Management Interfaces | • Web-based management • CLI-based management • Telnet (client/server) • SNMP v1/v2c/v3 • RMON1 (groups 1, 2, 3 and 9) • sFlow (V4/V5) • LLDP (802.1ab) and LLDP-MED |
| Security Features | • Port security • 802.1X port-based / MAC-based authentication • Guest VLANs • MAC authentication • Web authentication (per port) • MAC filter • Access Control List (ACL): L2/L3/L4, ingress/egress, time-based • AAA: RADIUS and TACACS+ authentication / authorization / accounting • HTTPS and SSL • SSH 1.5/V2.0 • DHCP Snooping • IP Source Guard • Dynamic ARP Inspection (DAI) • Denial of Service (DoS) protection • Management interface access filtering (SNMP, Web, Telnet) |
| Layer-2 Features | • Spanning Tree: STP (IEEE 802.1D), RSTP (IEEE 802.1w), MSTP (IEEE 802.1s) • MSTP instances: 65 (64 MSTI + 1 CIST) • 4K IEEE 802.1Q VLAN support • Port-based, protocol-based (802.1v), MAC-based and IP subnet-based VLANs • Private VLANs, Voice VLANs, VLAN trunking, VLAN translation • Link Aggregation: static trunk and IEEE 802.3ad LACP, 16 trunk groups • IGMP v1/v2/v3 Snooping, IGMP filtering / throttling / proxy • MVR (Multicast VLAN Registration) • Q-in-Q support • G.8032 v2 (ERPS) • UDLD • Broadcast / Multicast / Unknown Unicast Storm Control • Flow control: IEEE 802.3x and Back-Pressure |
| QoS Features | • 8 hardware priority queues per port • Traffic classification: IEEE 802.1p CoS, DSCP, PHB, port-based default priority • Traffic scheduling: Strict Priority, Weighted Round Robin (WRR), Strict + WRR • Diffserv • Rate limiting (ingress and egress, per port) — GE: resolution 64 Kbps ~ 1000 Mbps |
| Layer-3 Features | • Hardware-based IPv4 routing • IPv4 static route • RIP v1/v2 |
| Stacking | Hardware stacking, up to 4 units; managed as a single device with a single IP address |
| IPv6 Features | • IPv4/IPv6 dual protocol stack • ICMPv6, IPv6 Path MTU Discovery, IPv6 Neighbor Discovery • Stateless autoconfiguration and manual configuration • SNMP / HTTP / SSH / Telnet / Syslog / SNTP / TFTP over IPv6 • DHCPv6 (client, snooping), MVR6, IPv6 Source Guard, RA Guard • MLD Snooping v1/v2, IPv6 ND Snooping, IPv6 ACL • IPv6 sFlow, IPv6 DNS resolver |
| OAM Features | • IEEE 802.3ah Link OAM • IEEE 802.1ag Connectivity Fault Management (CFM) • ITU-T Y.1731 performance and throughput management |
| Diagnostics | |
| Diagnostic Features | • Digital Diagnostic Monitoring (DDM) support • Cable diagnostics • Port mirroring, VLAN mirror, MAC-based mirror, ACL mirror, remote port mirror (RSPAN) • Event/Error logging: Syslog (local flash), Remotelog, SMTP (e-mail notification) • Non-STP loopback detection |
