Specifications
Model	M7
Dimensions	124H x 144W x 131D (including rubber bumper)
Weight	1.56kg (including battery) / 1.31kg (without battery)
Fiber Count	Single
Applicable Fibers	SM(ITU-T G.652&T G.657) / MM(ITU-T G.651) / DS(ITU- T G.653) / NZDS(ITU-T G.655)
Compatible Fiber / Cable	0.25~3.0 mm / Indoor cable
Cleave Length	10 - 16 mm
Cladding Diameter	80 µm - 150 µm
Splicing Mode	Max 100 modes, 7 pre-set modes
Heating Mode	Max 30 modes, 3 pre-set modes
Typical Splice Loss	0.03dB(SM) / 0.01dB(MM) / 0.05dB(DS) / 0.05dB(NZDS) / 0.03dB(G.657) Measured by cut-back method according to ITU-T standards.
Return Loss	>> 60dB
Illumination	2 White LEDs
Splicing Time	7 sec (quick mode) / 9 sec (typical)
Estimated Splice Loss	Available
Heating Sleeve Length	20 mm - 60 mm
Heating Time	13 sec (45mm, slim 60mm), 15 sec (60mm)
Storage of Results	Last 10,000 records
Tensile Test	1.96~2.25N
Operating Conditions	Altitude 0~5000m above sea level, Humidity 0~95% relative humidity, -10~50°C, Wind 15m/s
Storage Conditions	Humidity 0~95%RH, -20~60°C, battery -20~30°C
Display	90° bi-directional view, 4.3' Color High Resolution Screen
Fiber View and Magnification	300X magnification with 3 screen modes, 400X partial magnification
Power Supply	AC Input 100-240V, DC Input 9-14V
Splicing Count / Heating with Battery	3000mAh Battery Capacity / Typical 110 times (Splice + Heat)
Operation Methods	Button / Touch Screen
Auto Calibration	Automatic arc calibration according to air pressure and temperature
Electrode Life	5500 arcs; can be extended using an electrode grinder
Terminal	USB Type-C
Weight and Dimensions
Height	4.88 inches (124 mm)
Width	5.66 inches (144mm)
Depth	5.15 inches (131mm)
Weight	3.43 pounds (1.56kg with battery)

Splices fiber ends in the field from a body carried in one hand.

A portable fusion splicer that uses active V-groove clad alignment. A 1.56 kg body and an adjustable strap hanger make long work on poles and ladders easier.

Active V-grooveAlignment method

0.03 dBTypical splice loss (SM)

7 secondsSplice time (quick mode)

4.3 inchTouch screen

5500 arcsElectrode life

3000 mAhBattery capacity

Key features

0.03dB

Typical splice loss on SM fiber

Loss runs 0.01 dB on MM fiber and 0.05 dB on DS and NZDS fiber.

7seconds

Splice time in quick mode

Typical mode splices in 9 seconds and heating takes 13 seconds.

1.56kg

Weight with battery

Without the battery it drops to 1.31 kg and takes little room in the case.

110times

Splice and heat cycles per charge

The 3000 mAh battery runs through a full field day.

5500arcs

Electrode life

An electrode grinder extends that life further.

300X

Magnification

Magnifies 300X across 3 screen modes and 400X in partial view.

DAILY FIELD USE

Strap carryThe adjustable strap hanger takes the unit on the shoulder and frees both hands.

Dual touchA double tap on the screen zooms in and out.

Work in the dark2 white LEDs light the fiber holders and the splice point.

Specifications

Model

Dimensions

124H x 144W x 131D (including rubber bumper)

Weight

1.56kg (including battery) / 1.31kg (without battery)

Fiber Count

Single

Applicable Fibers

SM(ITU-T G.652&T G.657) / MM(ITU-T G.651) / DS(ITU- T G.653) / NZDS(ITU-T G.655)

Compatible Fiber / Cable

0.25~3.0 mm / Indoor cable

Cleave Length

10 - 16 mm

Cladding Diameter

80 µm - 150 µm

Splicing Mode

Max 100 modes, 7 pre-set modes

Heating Mode

Max 30 modes, 3 pre-set modes

Typical Splice Loss

0.03dB(SM) / 0.01dB(MM) / 0.05dB(DS) / 0.05dB(NZDS) / 0.03dB(G.657)
Measured by cut-back method according to ITU-T standards.

Return Loss

>> 60dB

Illumination

2 White LEDs

Splicing Time

7 sec (quick mode) / 9 sec (typical)

Estimated Splice Loss

Available

Heating Sleeve Length

20 mm - 60 mm

Heating Time

13 sec (45mm, slim 60mm), 15 sec (60mm)

Storage of Results

Last 10,000 records

Tensile Test

1.96~2.25N

Operating Conditions

Altitude 0~5000m above sea level, Humidity 0~95% relative humidity, -10~50°C, Wind 15m/s

Storage Conditions

Humidity 0~95%RH, -20~60°C, battery -20~30°C

Display

90° bi-directional view, 4.3' Color High Resolution Screen

Fiber View and Magnification

300X magnification with 3 screen modes, 400X partial magnification

Power Supply

AC Input 100-240V, DC Input 9-14V

Splicing Count / Heating with Battery

3000mAh Battery Capacity / Typical 110 times (Splice + Heat)

Operation Methods

Button / Touch Screen

Auto Calibration

Automatic arc calibration according to air pressure and temperature

Electrode Life

5500 arcs; can be extended using an electrode grinder

Terminal

USB Type-C

Weight and Dimensions

Height

4.88 inches (124 mm)

Width

5.66 inches (144mm)

Depth

5.15 inches (131mm)

Weight

3.43 pounds (1.56kg with battery)

Ultra-Portably Designed Active V-Groove Fusion Splicer

Datasheet

M7

Kullanım Kılavuzu

M7

Similar Products

View 8x Premium Core Alignment Fusion Splicer

Premium Core Alignment Splicer Monitoring and Web Service

Smart Active Clad Alignment Fusion Splicer

Core Alignment Fusion Splicer